gitweb.js: Provide getElementsByClassName method (if it not exists)

[Gitweb] / README

diff --git a/README b/README
index 2c1024e1ab4794c62e53ca5494dea59d6a58b8a033af85bdb81ee9bb93e0dd1b..0dfea3ecd7e006b06f1fd0c4b0ee527d836128bef9ec12f7b3be0f8f4956ad93 100644 (file)
--- a/README
+++ b/README
@@ -29,7 +29,7 @@ You can specify the following configuration variables when building GIT:
    The filesystem traversing limit for getting the project list; the number
    is taken as depth relative to the projectroot.  It is used when
    GITWEB_LIST is a directory (or is not set; then project root is used).
    The filesystem traversing limit for getting the project list; the number
    is taken as depth relative to the projectroot.  It is used when
    GITWEB_LIST is a directory (or is not set; then project root is used).

-   Is is meant to speed up project listing on large work trees by limiting
+   This is meant to speed up project listing on large work trees by limiting

    search depth.  [Default: 2007]
  * GITWEB_LIST
    Points to a directory to scan for projects (defaults to project root
    search depth.  [Default: 2007]
  * GITWEB_LIST
    Points to a directory to scan for projects (defaults to project root


@@ -113,7 +113,11 @@ You can specify the following configuration variables when building GIT:
    does not exist.  If the environment variable GITWEB_CONFIG_SYSTEM is set
    when gitweb.cgi is executed, then the file specified in the environment
    variable will be loaded instead of the file specified when gitweb.cgi was
    does not exist.  If the environment variable GITWEB_CONFIG_SYSTEM is set
    when gitweb.cgi is executed, then the file specified in the environment
    variable will be loaded instead of the file specified when gitweb.cgi was

-   created.  [Default: /etc/gitweb.conf]
+   created.  [Default: /etc/gitweb.conf]+ * HIGHLIGHT_BIN
+   Path to the highlight executable to use (must be the one from
+   http://www.andre-simon.de due to assumptions about parameters and output).
+   Useful if highlight is not installed on your webserver's PATH.
+   [Default: highlight]

 
 Runtime gitweb configuration
 ----------------------------
 
 Runtime gitweb configuration
 ----------------------------


@@ -171,13 +175,15 @@ not include variables usually directly set during build):
  * $my_url, $my_uri
    Full URL and absolute URL of gitweb script;
    in earlier versions of gitweb you might have need to set those
  * $my_url, $my_uri
    Full URL and absolute URL of gitweb script;
    in earlier versions of gitweb you might have need to set those

-   variables, now there should be no need to do it.
+   variables, now there should be no need to do it.  See
+   $per_request_config if you need to set them still.

  * $base_url
    Base URL for relative URLs in pages generated by gitweb,
    (e.g. $logo, $favicon, @stylesheets if they are relative URLs),
    needed and used only for URLs with nonempty PATH_INFO via
    <base href="$base_url">.  Usually gitweb sets its value correctly,
    and there is no need to set this variable, e.g. to $my_uri or "/".
  * $base_url
    Base URL for relative URLs in pages generated by gitweb,
    (e.g. $logo, $favicon, @stylesheets if they are relative URLs),
    needed and used only for URLs with nonempty PATH_INFO via
    <base href="$base_url">.  Usually gitweb sets its value correctly,
    and there is no need to set this variable, e.g. to $my_uri or "/".

+   See $per_request_config if you need to set it anyway.

  * $home_link
    Target of the home link on top of all pages (the first part of view
    "breadcrumbs").  By default set to absolute URI of a page ($my_uri).
  * $home_link
    Target of the home link on top of all pages (the first part of view
    "breadcrumbs").  By default set to absolute URI of a page ($my_uri).


@@ -199,6 +205,15 @@ not include variables usually directly set during build):
    full description is available as 'title' attribute (usually shown on
    mouseover).  By default set to 25, which might be too small if you
    use long project descriptions.
    full description is available as 'title' attribute (usually shown on
    mouseover).  By default set to 25, which might be too small if you
    use long project descriptions.

+ * $projects_list_group_categories
+   Enables the grouping of projects by category on the project list page.
+   The category of a project is determined by the $GIT_DIR/category
+   file or the 'gitweb.category' variable in its repository configuration.
+   Disabled by default.
+ * $project_list_default_category
+   Default category for projects for which none is specified.  If set
+   to the empty string, such projects will remain uncategorized and
+   listed at the top, above categorized projects.

  * @git_base_url_list
    List of git base URLs used for URL to where fetch project from, shown
    in project summary page.  Full URL is "$git_base_url/$project".
  * @git_base_url_list
    List of git base URLs used for URL to where fetch project from, shown
    in project summary page.  Full URL is "$git_base_url/$project".


@@ -235,7 +250,21 @@ not include variables usually directly set during build):
    If server load exceed this value then return "503 Service Unavailable" error.
    Server load is taken to be 0 if gitweb cannot determine its value.  Set it to
    undefined value to turn it off.  The default is 300.
    If server load exceed this value then return "503 Service Unavailable" error.
    Server load is taken to be 0 if gitweb cannot determine its value.  Set it to
    undefined value to turn it off.  The default is 300.

-
+ * $highlight_bin
+   Path to the highlight executable to use (must be the one from
+   http://www.andre-simon.de due to assumptions about parameters and output).
+   Useful if highlight is not installed on your webserver's PATH.
+   [Default: highlight]
+ * $per_request_config
+   If set to code reference, it would be run once per each request.  You can
+   set parts of configuration that change per session, e.g. by setting it to
+     sub { $ENV{GL_USER} = $cgi->remote_user || "gitweb"; }
+   Otherwise it is treated as boolean value: if true gitweb would process
+   config file once per request, if false it would process config file only
+   once.  Note: $my_url, $my_uri, and $base_url are overwritten with
+   their default values before every request, so if you want to change
+   them, be sure to set this variable to true or a code reference effecting
+   the desired changes.  The default is true.

 
 Projects list file format
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Projects list file format
 ~~~~~~~~~~~~~~~~~~~~~~~~~


@@ -292,6 +321,13 @@ You can use the following files in repository:
    from the template during repository creation. You can use the
    gitweb.description repo configuration variable, but the file takes
    precedence.
    from the template during repository creation. You can use the
    gitweb.description repo configuration variable, but the file takes
    precedence.

+ * category (or gitweb.category)
+   Singe line category of a project, used to group projects if
+   $projects_list_group_categories is enabled. By default (file and
+   configuration variable absent), uncategorized projects are put in
+   the $project_list_default_category category. You can use the
+   gitweb.category repo configuration variable, but the file takes
+   precedence.

  * cloneurl (or multiple-valued gitweb.url)
    File with repository URL (used for clone and fetch), one per line.
    Displayed in the project summary page. You can use multiple-valued
  * cloneurl (or multiple-valued gitweb.url)
    File with repository URL (used for clone and fetch), one per line.
    Displayed in the project summary page. You can use multiple-valued