Give magic file symlinks unique names

[Shushe] / README.markdown

diff --git a/README.markdown b/README.markdown
index 7f5e1df90bd128b3550056f9dc656c7a1a5ff08f..040d56465513be1b09df1536dd481cbe15020f09 100644 (file)
--- a/README.markdown
+++ b/README.markdown
@@ -24,7 +24,7 @@ It aims to do this with zero dependencies beyond the programs already
   installed on your computer†.
 
 † Assuming an operating system with a fairly featureful, and
   installed on your computer†.
 
 † Assuming an operating system with a fairly featureful, and

-  Posix‐compliant, development setup (e·g, macOS).
+  Posix‐compliant, development setup (e·g, Macintosh ≥ version 10.8).

 In fact, on Linux you will probably need to install a few programs:
   `libxml2-utils`, `xsltproc`, `sharutils`, and `pax`.
 
 In fact, on Linux you will probably need to install a few programs:
   `libxml2-utils`, `xsltproc`, `sharutils`, and `pax`.
 


@@ -51,16 +51,33 @@ In Ascii environments, ⛩️📰 书社 should be written `Shushe`, following
 ## Prerequisites
 
 In most cases, ⛩️📰 书社 aims to require only functionality which is
 ## Prerequisites
 
 In most cases, ⛩️📰 书社 aims to require only functionality which is

-  present in all Posix‐compliant operating systems.
+  present in all Posix‐compliant (`POSIX.1-2001`) operating systems.

 There are a few exceptions.
 Details on particular programs are given below; if a program is not
   listed, it is assumed that any Posix‐compliant implementation will
   work.
 
 There are a few exceptions.
 Details on particular programs are given below; if a program is not
   listed, it is assumed that any Posix‐compliant implementation will
   work.
 

+### `diff`
+
+This is a Posix utility, but ⛩️📰 书社 depends on functionality
+  introduced after `POSIX.1-2001` (the `-u` option, introduced in
+  `POSIX.1-2008`).
+Macintosh systems somewhat interestingly implement this option
+  correctly in legacy mode (`COMMAND_MODE=legacy`) but incorrectly by
+  default (despite claiming `POSIX.1-2008` conformance for this
+  utility).
+[Note this erroneous comment claiming nanosecond & timezone are
+  extensions rather than standardized.][rdar-92753335]
+Despite this, the default Macintosh implementation will still work with
+  ⛩️📰 书社, with the caveat that the timestamp will only include a
+  fractional component when a Posix⹀compliant (e·g, Macintosh legacy or
+  G·N·U) implementation is used.
+

 ### `file`
 
 ### `file`
 

-This is a Posix utility, but ⛩️📰 书社 currently depends on
-  unspecified behaviour.
+This is a Posix utility, but it was considered optional in
+  `POSIX.1-2001` (altho it was made mandatory in `POSIX.1-2008`) and
+  ⛩️📰 书社 currently depends on unspecified behaviour.

 It requires support for the following additional options :⁠—
 
 - **`-C`**, when supplied with `-m`, must be useable to compile a
 It requires support for the following additional options :⁠—
 
 - **`-C`**, when supplied with `-m`, must be useable to compile a


@@ -88,8 +105,9 @@ To disable it, set `GIT=`.
 
 ### `make`
 
 
 ### `make`
 

-This is a Posix utility, but ⛩️📰 书社 currently depends on
-  unspecified behaviour.
+This is a Posix utility, but it is considered an optional Software
+  Development utility and ⛩️📰 书社 currently depends on unspecified
+  behaviour.

 ⛩️📰 书社 requires specifically the G·N·U version of `make`, and
   depends on functionality present in version 3.81 or later.
 It is not expected to work in previous versions, or with other
 ⛩️📰 书社 requires specifically the G·N·U version of `make`, and
   depends on functionality present in version 3.81 or later.
 It is not expected to work in previous versions, or with other


@@ -97,27 +115,30 @@ It is not expected to work in previous versions, or with other
 
 ### `pax`
 
 
 ### `pax`
 

-This is a Posix utility, but not included in the Linux Standard Base or
-  installed by default in many distributions.
-Only `ustar` format support is required.
+This is a Posix utility, but it is not included in the Linux Standard
+  Base or installed by default in many distributions.
+⛩️📰 书社 only requires support for the `ustar` format.

 
 ### `uudecode` and `uuencode`
 
 
 ### `uudecode` and `uuencode`
 

-These are Posix utilities, but not included in the Linux Standard Base
-  or installed by default in many distributions.
+These are Posix utilities, but they were considered optional in
+  `POSIX.1-2001` (altho they are made mandatory in `POSIX.1-2008`) and
+  they are not included in the Linux Standard Base or installed by
+  default in many distributions.

 The G·N·U [Sharutils](https://www.gnu.org/software/sharutils/) package
 The G·N·U [Sharutils](https://www.gnu.org/software/sharutils/) package

-  can be installed to access them.
+  provides one implementation.

 
 ### `xmlcatalog` and `xmllint`
 
 These are not a Posix utilities.
 
 ### `xmlcatalog` and `xmllint`
 
 These are not a Posix utilities.

-They is a part of `libxml2`, but may need to be installed separately
-  (e·g by the name `libxml2-utils`).
+They are a part of `libxml2`, but may need to be installed separately
+  on some platforms (e·g by the name `libxml2-utils`).

 
 ### `xsltproc`
 
 This is not a Posix utility.
 
 ### `xsltproc`
 
 This is not a Posix utility.

-It is a part of `libxslt`, but may need to be installed separately.
+It is a part of `libxslt`, but may need to be installed separately on
+  some platforms.

 
 ## Basic Usage
 
 
 ## Basic Usage
 


@@ -262,6 +283,8 @@ The following additional variables can be used to control the behaviour
     those which end with a cloparen, and those which contain a hash,
     buck, percent, asterisk, colon, semi, eroteme, bracket, backslash,
     or pipe.
     those which end with a cloparen, and those which contain a hash,
     buck, percent, asterisk, colon, semi, eroteme, bracket, backslash,
     or pipe.

+  It is important that these rules not produce any output, as anything
+    printed to `stdout` will be considered a result of the find.

 
 - **`EXTRAFINDRULES`:**
   The value of this variable is appended to `FINDRULES` by default, to
 
 - **`EXTRAFINDRULES`:**
   The value of this variable is appended to `FINDRULES` by default, to


@@ -296,6 +319,11 @@ The following additional variables can be used to control the behaviour
   A white·space‐separated list of media types or media type suffixes to
     consider X·M·L (default: `application/xml text/xml +xml`).
 
   A white·space‐separated list of media types or media type suffixes to
     consider X·M·L (default: `application/xml text/xml +xml`).
 

+- **`FINALIZE`:**
+  A program to run on (unspecial) X·M·L files after they are
+    transformed (default: `xmllint --nonet --nsclean`).
+  This variable can be used for postprocessing.
+

 - **`THISREV`:**
   The current version of ⛩️📰 书社 (default: derived from the current
     git tag/branch/commit).
 - **`THISREV`:**
   The current version of ⛩️📰 书社 (default: derived from the current
     git tag/branch/commit).


@@ -702,3 +730,4 @@ Most source files are licensed under the terms of the <cite>Mozilla
 
 [REUSE]: <https://reuse.software/spec/>
 [draft-phillips-record-jar-01]: <https://datatracker.ietf.org/doc/html/draft-phillips-record-jar-01>
 
 [REUSE]: <https://reuse.software/spec/>
 [draft-phillips-record-jar-01]: <https://datatracker.ietf.org/doc/html/draft-phillips-record-jar-01>

+[rdar-92753335]: <https://github.com/apple-oss-distributions/patch_cmds/blob/5084833f90df1b0e0924ea56f94c0199b3b8bbc6/diff/diffreg.c#L1800-L1808>