+<!--
+SPDX-FileCopyrightText: 2024 Lady <https://www.ladys.computer/about/#lady>
+SPDX-License-Identifier: CC0-1.0
+-->
# ⛩️📰 书社
<b>A make·file for X·M·L.</b>
- Enabling easy inclusion of source files within each other.
It aims to do this with zero dependencies beyond the programs already
- installed on your computer.
-(On Linux machines, you may need to install `libxml2-utils` to get the
- commandline programs from `libxml2`.)
+ installed on your computer†.
-**Note:**
-⛩️📰 书社 requires functionality present in G·N·U Make 3.81 (or later)
- and will not work in previous versions, or other implementations of
- Make.
-Compatibility with later versions of G·N·U Make is assumed, but not
- tested.
+† Assuming an operating system with a fairly featureful, and
+ Posix‐compliant, development setup (e·g, macOS).
+In fact, on Linux you will probably need to install a few programs:
+ `libxml2-utils`, `xsltproc`, `sharutils`, and `pax`.
## Nomenclature
In Ascii environments, ⛩️📰 书社 should be written `Shushe`, following
the pinyin transliteration.
+## Prerequisites
+
+In most cases, ⛩️📰 书社 aims to require only functionality which is
+ present in all Posix‐compliant operating systems.
+There are a few exceptions.
+Details on particular programs are given below; if a program is not
+ listed, it is assumed that any Posix‐compliant implementation will
+ work.
+
+### `date`
+
+This is a Posix utility, but ⛩️📰 书社 currently depends on
+ unspecified behaviour.
+When the G·N·U version of `stat` is being used, then the G·N·U version
+ of `date` is also expected.
+
+### `file`
+
+This is a Posix utility, but ⛩️📰 书社 currently depends on
+ unspecified behaviour.
+It requires support for the following additional options :—
+
+- **`-C`**, when supplied with `-m`, must be useable to compile a
+ `.mgc` magicfile for use with future invocations of `file`.
+
+- **`--files-from`** must be useable to provide a file that `file`
+ should read file·names from, and `-` must be useable in this
+ context to specify the standard input.
+
+- **`--mime-type`** must cause `file` to print the internet media type
+ of the file with no charset parameter.
+
+- **`--separator`** must be useable to set the separator that `file`
+ uses to separate file names from types.
+
+These options are implemented by the
+ [Fine Free File Command](https://darwinsys.com/file/), which is used
+ by most operating systems.
+
+### `git`
+
+This is not a Posix utility.
+Usage of `git` is optional, but recommended (and activated by default).
+To disable it, set `GIT=`.
+
+### `make`
+
+This is a Posix utility, but ⛩️📰 书社 currently depends on
+ unspecified behaviour.
+⛩️📰 书社 requires specifically the G·N·U version of `make`, and
+ depends on functionality present in version 3.81 or later.
+It is not expected to work in previous versions, or with other
+ implementations of Make.
+
+### `pax`
+
+This is a Posix utility, but not included in the Linux Standard Base or
+ installed by default in many distributions.
+Only `ustar` format support is required.
+
+### `stat`
+
+This is not a Posix utility, and nor is it particularly portable.
+To get around incompatibilities, ⛩️📰 书社 attempts to recognize G·N·U
+ `stat` by searching for the string `GNU` when invoked with the
+ `--version` option, and falls back to B·S·D behaviour otherwise.
+
+### `uudecode` and `uuencode`
+
+These are Posix utilities, but not included in the Linux Standard Base
+ or installed by default in many distributions.
+The G·N·U [Sharutils](https://www.gnu.org/software/sharutils/) package
+ can be installed to access them.
+
+### `xargs`
+
+This is a Posix utility, but ⛩️📰 书社 currently depends on
+ unspecified behaviour.
+It requires support for the `-0` flag, which must disable the special
+ quote and whitespace handling of `xargs` in favour of null‐terminated
+ strings.
+
+### `xmlcatalog` and `xmllint`
+
+These are not a Posix utilities.
+They is a part of `libxml2`, but may need to be installed separately
+ (e·g by the name `libxml2-utils`).
+
+### `xsltproc`
+
+This is not a Posix utility.
+It is a part of `libxslt`, but may need to be installed separately.
+
## Basic Usage
Place source files in `sources/` and run `make install` to compile
5. ⛩️📰 书社 uses the dependency tree to establish prerequisites for
each output file.
-6. ⛩️📰 书社 compiles each output file to `build/public`.
+6. ⛩️📰 书社 compiles each output file to `build/result`.
+
+7. ⛩️📰 书社 copies most output files from `build/result` to
+ `build/public`, but it does some additional processing instead on
+ those which indicate a non‐X·M·L desired final output form.
-7. ⛩️📰 书社 copies the output files to `public`.
+8. ⛩️📰 书社 copies the final resulting files to `public`.
You can use `make list` to list each identified source file or include
alongside its computed type and dependencies.
corresponding buildfile or output file is older than its
prerequisites.
-## Namespaces
+## Name·spaces
-The ⛩️📰 书社 namespace is `urn:fdc:ladys.computer:20231231:Shu1She4`.
+The ⛩️📰 书社 name·space is `urn:fdc:ladys.computer:20231231:Shu1She4`.
-This document uses a few namespace prefixes, with the following
+This document uses a few name·space prefixes, with the following
meanings :—
-| Prefix | Expansion |
-| -------: | :----------------------------------------- |
-| `html:` | `http://www.w3.org/1999/xhtml` |
-| `xlink:` | `http://www.w3.org/1999/xlink` |
-| `xslt:` | `http://www.w3.org/1999/XSL/Transform` |
-| `书社:` | `urn:fdc:ladys.computer:20231231:Shu1She4` |
+| Prefix | Expansion |
+| ---------: | :-------------------------------------------- |
+| `catalog:` | `urn:oasis:names:tc:entity:xmlns:xml:catalog` |
+| `exsl:` | `http://exslt.org/common` |
+| `exslstr:` | `http://exslt.org/strings` |
+| `html:` | `http://www.w3.org/1999/xhtml` |
+| `svg:` | `http://www.w3.org/2000/svg` |
+| `xlink:` | `http://www.w3.org/1999/xlink` |
+| `xslt:` | `http://www.w3.org/1999/XSL/Transform` |
+| `书社:` | `urn:fdc:ladys.computer:20231231:Shu1She4` |
## Setup and Configuration
- `awk`
- `cat`
+- `cksum`
- `cp`
- `date`
- `echo`
- `file`
- `find`
- `git` (optional; set `GIT=` to disable)
-- `mkdir` (requires support for `-p`)
+- `grep`
+- `ln`
+- `ls`
+- `mkdir`
- `mv`
-- `od` (requires support for `-t x1`)
+- `od`
+- `pax` (only when generating archives)
- `printf`
- `rm`
- `sed`
- `sleep`
-- `stat`
+- `stat` (BSD *or* GNU)
- `test`
- `touch`
-- `tr` (requires support for `-d`)
-- `uuencode` (requires support for `-m` and `-r`)
+- `tr`
+- `uuencode`
+- `uudecode`
- `xargs` (requires support for `-0`)
- `xmlcatalog` (provided by `libxml2`)
- `xmllint` (provided by `libxml2`)
This variable is used to find the ⛩️📰 书社 `lib/` folder, which is
expected to be in the same location.
-- **`MAGICDIR`:**
- The location of the magic files to use (default: `$(THISDIR)/magic`).
+- **`MAGIC`:**
+ A white·space‐separated list of magic files to use (default:
+ `$(THISDIR)/magic/*`).
+
+- **`EXTRAMAGIC`:**
+ The value of this variable is appended to `MAGIC` by default, to
+ enable additional magic files without overriding the existing ones.
- **`FINDRULES`:**
Rules to use with `find` when searching for source files.
- The default ignores files that start with a period or hyphen‐minus
- and those which contain a hash, buck, percent, asterisk, colon,
- semi, eroteme, bracket, backslash, or pipe.
+ The default ignores files that start with a period or hyphen‐minus,
+ those which end with a cloparen, and those which contain a hash,
+ buck, percent, asterisk, colon, semi, eroteme, bracket, backslash,
+ or pipe.
- **`EXTRAFINDRULES`:**
The value of this variable is appended to `FINDRULES` by default, to
A white·space‐separated list of media types to consider X·M·L
(default: `application/xml text/xml`).
+- **`THISREV`:**
+ The current version of ⛩️📰 书社 (default: derived from the current
+ git tag/branch/commit).
+
+- **`SRCREV`:**
+ The current version of the source files (default: derived from the
+ current git tag/branch/commit).
+
- **`VERBOSE`:**
If this variable has a value, every recipe instruction will be
printed when it runs (default: empty).
contain Ascii white·space, colons (`:`), semis (`;`), pipes (`|`),
bucks (`$`), percents (`%`), hashes (`#`), asterisks (`*`), brackets
(`[` or `]`), erotemes (`?`), backslashes (`\`), or control
- characters, and must not begin with a hyphen‐minus (`-`).**
+ characters, must not begin with a hyphen‐minus (`-`), must not end
+ with a cloparen (`)`), and must not contain quoted braces (`"{` or
+ `}"`).**
The former characters have the potential to conflict with make syntax,
- and a leading hyphen‐minus is confusable for a command‐line argument.
+ a leading hyphen‐minus is confusable for a command‐line argument, a
+ trailing cloparen [activates a bug in G·N·U Make
+ 3.81](https://stackoverflow.com/questions/17148468/capturing-filenames-including-parentheses-with-gnu-makes-wildcard-function#comment24825307_17148894),
+ and quoted braces are used internally by the program.
## Parsers
⛩️📰 书社 comes with some parsers; namely :—
- **`parsers/plain.xslt`:**
- Wraps `text/plain` contents in a `<html:pre class="plain">` element.
+ Wraps `text/plain` contents in a `<html:pre>` element.
- **`parsers/record-jar.xslt`:**
- Converts `text/record-jar` contents into a
- `<html:div class="record-jar">` of `<html:dl>` elements (one for
- each record).
+ Converts `text/record-jar` contents into a `<html:div>` of
+ `<html:dl>` elements (one for each record).
- **`parsers/tsv.xslt`:**
- Converts `text/tab-separated-values` contents into an
- `<html:table class="tsv">` element.
+ Converts `text/tab-separated-values` contents into an `<html:table>`
+ element.
New ⛩️📰 书社 parsers which target plaintext formats should have an
`<xslt:template>` element with no `@name` or `@mode` and whose
`@match` attribute…
-- Starts with an appropriately‐namespaced qualified name for a
+- Starts with an appropriately‐name·spaced qualified name for a
`<html:script>` element.
- Follows this with the string `[@type=`.
embeds); transforms are applied *after*.
It is **strongly recommended** that auxillary templates in parsers be
- namespaced (by `@name` or `@mode`) whenever possible, to avoid
+ name·spaced (by `@name` or `@mode`) whenever possible, to avoid
conflicts between parsers.
+### Attributes added during parsing
+
+⛩️📰 书社 will add a few attributes to the output of the parsing step,
+ namely :—
+
+- A `@书社:cksum` attribute on toplevel result elements, giving the
+ `cksum` checksum of the corresponding source file.
+
+- For the elements which result from parsing plaintext `<html:script>`
+ elements :—
+
+ - A `@书社:parsed-by` attribute, giving a space‐separated list of
+ parsers which parsed the node.
+ (Generally, this will be a list of one, but it is possible for the
+ result of a parse to be another plaintext node, which may be
+ parsed by a different parser.)
+
+ - A `@书社:media-type` attribute, giving the identified media type of
+ the plaintext node.
+
## Embedding
Documents can be embedded in other documents using a `<书社:link>`
is an asset, in which case an `<html:object>` element is produced
instead (with the contents of the asset file provided as a base64
`data:` u·r·i).
+Embed replacements will be given a `@书社:identifier` attribute whose
+ value will match the `@xlink:href` of the embed.
Embedding takes place after parsing but before transformation, so
parsers are able to generate their own embeds.
after all necessary parsing and embedding has taken place.
⛩️📰 书社 comes with some transforms; namely :—
-- **`transforms/attributes.xslt`:**
- Applies transforms to the children of any `<书社:apply-attributes>`
- elements, and then applies the attributes of the
- `<书社:apply-attributes>` to each result child, replacing the
- element with the result.
- This is useful in combination with image embeds to apply alt‐text to
- the resulting `<html:img>`.
-
- **`transforms/asset.xslt`:**
Converts `<html:object>` elements which correspond to recognized
media types into the appropriate H·T·M·L elements, and deletes
- **`urn:fdc:ladys.computer:20231231:Shu1She4:title`:**
Provides the title of the page.
- ⛩️📰 书社 automatically encapsulates embeds so that their metadata
- does not propogate up to the embedding document.
+ ⛩️📰 书社 automatically encapsulates H·T·M·L embeds so that their
+ metadata does not propogate up to the embedding document.
To undo this behaviour, remove the `@itemscope` and `@itemtype`
attributes from the embed during the transformation phase.
+- **`transforms/serialization.xslt`:**
+ Replaces `<书社:serialize-xml>` elements with the (escaped)
+ serialized X·M·L of their contents.
+ This replacement happens during the application phase, after most
+ other transformations have taken place.
+
+ If a `@with-namespaces` attribute is provided, any name·space nodes
+ on the toplevel serialized elements whose U·R·I’s correspond to the
+ definitions of the provided prefixes, as defined for the
+ `<书社:serialize-xml>` element, will be declared using name·space
+ attributes on the serialized elements.
+ Otherwise, only name·space nodes which _differ_ from the definitions
+ on the `<书社:serialize-xml>` element will be declared.
+ The string `#default` may be used to represent the default
+ name·space.
+ Multiple prefixes may be provided, separated by white·space.
+
+ When it comes to name·spaces used internally by ⛩️📰 书社, the
+ prefix used by ⛩️📰 书社 may be declared _in addition to_ the
+ prefix(es) used in the source document(s).
+ It is not possible to selectively only declare one prefix for a
+ name·space to the exclusion of others.
+
+ `<书社:raw-output>` elements may be used inside of
+ `<书社:serialize-xml>` elements to inject raw output into the
+ serialized X·M·L.
+
The following are recommendations on effective creation of
transforms :—
It is likely an error if two transforms have templates which match
the same element (unless the templates have different priority).
-- Namespace templates (with `@name` or `@mode`) whenever possible.
+- Name·space templates (with `@name` or `@mode`) whenever possible.
- Set `@exclude-result-prefixes` on the root `xslt:transform` element
- to reduce the number of declared namespaces in the final result.
+ to reduce the number of declared name·spaces in the final result.
## Global Params
- **`BUILDTIME`:**
The current time.
+- **`CKSUM`:**
+ The checksum of the source file (⅌ `cksum`).
+
+- **`IDENTIFIER`:**
+ The ⛩️📰 书社 identifier of the source file (a u·r·i beginning with
+ `about:shushe`).
+
- **`SRCREV`:**
- The tag or hash of the current commit in the working directory (if
- `GIT` is defined and `./.git` exists).
+ The value of the `SRCREV` variable (if present).
- **`SRCTIME`:**
The time at which the source file was last modified.
-- **`VERSION`:**
- The tag or hash of the current commit in `THISDIR` (if `GIT` is
- defined and `$(THISDIR)/.git` exists).
+- **`THISREV`:**
+ The value of the `THISREV` variable (if present).
The following params are only available in transforms :—
Output wrapping can be entirely disabled by adding a
`@书社:disable-output-wrapping` attribute to the top‐level element in
the result tree.
+It will not be performed on outputs whose root elements are
+ `<书社:archive>`, `<书社:base64-binary>`, or `<书社:raw-text>`
+ (described below).
+
+## Applying Attributes
+
+The `<书社:apply-attributes>` element will apply any attributes on the
+ element to the element(s) it wraps.
+It is especially useful in combination with embeds.
+
+The `<书社:apply-attributes-to-root>` element will apply any attributes
+ on the element to the root node of the final transformation result.
+It is especially useful in combination with output wrapping.
+
+In both cases, attributes from various sources are combined with
+ white·space between them.
+Attribute application takes place after all ordinary transforms have
+ completed.
+
+Both elements ignore attributes in the `xml:` name·space, except for
+ `@xml:lang`, which ignores all but the first definition (including
+ any already present on the root element).
+On H·T·M·L and S·V·G elements, `@lang` has the same behaviour as
+ `@xml:lang`.
+
+## Other Kinds of Output
+
+There are a few special elements in the `书社:` name·space which, if
+ they appear as the toplevel element in a transformation result, cause
+ ⛩️📰 书社 to produce something other than an X·M·L file.
+They are :—
+
+- **`<书社:archive>`:**
+ Each child element with a `@书社:archived-as` attribute will be
+ archived as a separate file in a resulting tarball (this attribute
+ gives the file name).
+ These elements will be processed the same as the root elements of any
+ other file (e·g, they will be wrapped; they can themselves specify
+ non X·M·L output types, ⁊·c).
+ Other child elements will be ignored.
+
+- **`<书社:base64-binary>`:**
+ The text nodes in the transformation result will, after removing all
+ Ascii whitespace, be treated as a Base·64 string, which is then
+ decoded.
+
+- **`<书社:raw-text>`:**
+ A plaintext (U·T·F‐8) file will be produced from the text nodes in
+ the transformation result.
+
+## Pagination
+
+It is possible to have a single source file produce multiple output
+ files via `<书社:page>` elements, whose `@name` gives the name of the
+ page.
+If a parsed document has a `@书社:destination` which contains `%s`,
+ the `%s` will be replaced with the `@name` for each `<书社:page>` (and
+ removed for the main output).
+Otherwise, the `@name` is inserted before the first period of the
+ filename (or at the end of the filename for those with no period).
+If `<书社:page>`s do not have a `@name`, they are numbered
+ sequentially.
+The destination of pages must be in the same directory as their parent.
+
+Pagination essentially forms a limited convenience for the more
+ sophisticated technique of creating an archive with ⛩️📰 书社 and
+ then unarchiving it.
+Pages are, from Make’s point of view, untracked side·effects of
+ installing the main output, meaning they cannot be targeted directly
+ and will not appear in `make list` or `make listout`.
+They are intended solely for the like of indices and feeds, for which
+ convenience and necessity outweigh their flaws.
## License
-Source files are licensed under the terms of the <cite>Mozilla Public
- License, version 2.0</cite>.
-For more information, see [LICENSE](./LICENSE).
+This repository conforms to [REUSE][].
+
+Most source files are licensed under the terms of the <cite>Mozilla
+ Public License, version 2.0</cite>.
+[REUSE]: <https://reuse.software/spec/>
[draft-phillips-record-jar-01]: <https://datatracker.ietf.org/doc/html/draft-phillips-record-jar-01>
Lady’s Gitweb / Shushe / blobdiff