]> Lady’s Gitweb - Shushe/blobdiff - README.markdown
Add H·T·M·L microdata to archive children
[Shushe] / README.markdown
index 6b4f06ed18627a3a8dc344f94b5595b74bb85ba3..31a73336f7291c926acbd8345e513504267de084 100644 (file)
@@ -1,8 +1,12 @@
-# ⛩️📰 书社
+<!--
+SPDX-FileCopyrightText: 2024 Lady <https://www.ladys.computer/about/#lady>
+SPDX-License-Identifier: CC0-1.0
+-->
+# ⛩📰 书社
 
 <b>A make·file for X·M·L.</b>
 
 
 <b>A make·file for X·M·L.</b>
 
-<dfn>⛩📰 书社</dfn> aims to make it easy to generate websites with
+<dfn>⛩📰 书社</dfn> aims to make it easy to generate websites with
   X·S·L·T and G·N·U Make.
 It is consequently only a good choice for people who like X·S·L·T and
   G·N·U Make and wish it were easier to make websites with them.
   X·S·L·T and G·N·U Make.
 It is consequently only a good choice for people who like X·S·L·T and
   G·N·U Make and wish it were easier to make websites with them.
@@ -17,16 +21,12 @@ It makes things easier by :⁠—
 - Enabling easy inclusion of source files within each other.
 
 It aims to do this with zero dependencies beyond the programs already
 - Enabling easy inclusion of source files within each other.
 
 It aims to do this with zero dependencies beyond the programs already
-  installed on your computer.
-(On Linux machines, you may need to install `libxml2-utils` to get the
-  commandline programs from `libxml2`.)
+  installed on your computer†.
 
 
-**Note:**
-⛩️📰 书社 requires functionality present in G·N·U Make 3.81 (or later)
-  and will not work in previous versions, or other implementations of
-  Make.
-Compatibility with later versions of G·N·U Make is assumed, but not
-  tested.
+† Assuming an operating system with a fairly featureful, and
+  Posix‐compliant, development setup (e·g, Macintosh ≥ version 10.8).
+In fact, on Linux you will probably need to install a few programs:
+  `libxml2-utils`, `xsltproc`, `sharutils`, and `pax`.
 
 ## Nomenclature
 
 
 ## Nomenclature
 
@@ -45,33 +45,129 @@ In Japanese, it is an alternate spelling for <i lang="ja">やしろ</i>,
 The name <i lang="cmn-Hans">书社</i> was chosen to play on this pun, as
   it is intended as a publishing program for webshrines.
 
 The name <i lang="cmn-Hans">书社</i> was chosen to play on this pun, as
   it is intended as a publishing program for webshrines.
 
-In Ascii environments, ⛩📰 书社 should be written `Shushe`, following
+In Ascii environments, ⛩📰 书社 should be written `Shushe`, following
   the pinyin transliteration.
 
   the pinyin transliteration.
 
+## Prerequisites
+
+In most cases, ⛩📰 书社 aims to require only functionality which is
+  present in all Posix‐compliant (`POSIX.1-2001`) operating systems.
+There are a few exceptions.
+Details on particular programs are given below; if a program is not
+  listed, it is assumed that any Posix‐compliant implementation will
+  work.
+
+### `diff`
+
+This is a Posix utility, but ⛩📰 书社 depends on functionality
+  introduced after `POSIX.1-2001` (the `-u` option, introduced in
+  `POSIX.1-2008`).
+Macintosh systems somewhat interestingly implement this option
+  correctly in legacy mode (`COMMAND_MODE=legacy`) but incorrectly by
+  default (despite claiming `POSIX.1-2008` conformance for this
+  utility).
+[Note this erroneous comment claiming nanosecond & timezone are
+  extensions rather than standardized.][rdar-92753335]
+Despite this, the default Macintosh implementation will still work with
+  ⛩📰 书社, with the caveat that the timestamp will only include a
+  fractional component when a Posix⹀compliant (e·g, Macintosh legacy or
+  G·N·U) implementation is used.
+
+### `file`
+
+This is a Posix utility, but it was considered optional in
+  `POSIX.1-2001` (altho it was made mandatory in `POSIX.1-2008`) and
+  ⛩📰 书社 currently depends on unspecified behaviour.
+It requires support for the following additional options :⁠—
+
+- **`-C`**, when supplied with `-m`, must be useable to compile a
+    `.mgc` magicfile for use with future invocations of `file`.
+
+- **`--files-from`** must be useable to provide a file that `file`
+    should read file·names from, and `-` must be useable in this
+    context to specify the standard input.
+
+- **`--mime-type`** must cause `file` to print the internet media type
+    of the file with no charset parameter.
+
+- **`--separator`** must be useable to set the separator that `file`
+    uses to separate file names from types.
+
+These options are implemented by the
+  [Fine Free File Command](https://darwinsys.com/file/), which is used
+  by most operating systems.
+
+### `git`
+
+This is not a Posix utility.
+Usage of `git` is optional, but recommended (and activated by default).
+To disable it, set `GIT=`.
+
+### `make`
+
+This is a Posix utility, but it is considered an optional Software
+  Development utility and ⛩📰 书社 currently depends on unspecified
+  behaviour.
+⛩📰 书社 requires specifically the G·N·U version of `make`, and
+  depends on functionality present in version 3.81 or later.
+It is not expected to work in previous versions, or with other
+  implementations of Make.
+
+### `pax`
+
+This is a Posix utility, but it is not included in the Linux Standard
+  Base or installed by default in many distributions.
+⛩📰 书社 only requires support for the `ustar` format.
+
+### `uudecode` and `uuencode`
+
+These are Posix utilities, but they were considered optional in
+  `POSIX.1-2001` (altho they are made mandatory in `POSIX.1-2008`) and
+  they are not included in the Linux Standard Base or installed by
+  default in many distributions.
+The G·N·U [Sharutils](https://www.gnu.org/software/sharutils/) package
+  provides one implementation.
+
+### `xmlcatalog` and `xmllint`
+
+These are not a Posix utilities.
+They are a part of `libxml2`, but may need to be installed separately
+  on some platforms (e·g by the name `libxml2-utils`).
+
+### `xsltproc`
+
+This is not a Posix utility.
+It is a part of `libxslt`, but may need to be installed separately on
+  some platforms.
+
 ## Basic Usage
 
 Place source files in `sources/` and run `make install` to compile
   the result to `public/`.
 Compilation involves the following steps :⁠—
 
 ## Basic Usage
 
 Place source files in `sources/` and run `make install` to compile
   the result to `public/`.
 Compilation involves the following steps :⁠—
 
-1. ⛩📰 书社 compiles all of the magic files in `magic/` into a single
+1. ⛩📰 书社 compiles all of the magic files in `magic/` into a single
     file, `build/magic.mgc`.
 
     file, `build/magic.mgc`.
 
-2. ⛩📰 书社 processes all of the parsers in `parsers/` and determines
+2. ⛩📰 书社 processes all of the parsers in `parsers/` and determines
     the list of supported plaintext types.
 
     the list of supported plaintext types.
 
-3. ⛩📰 书社 identifies all of the source files and includes and uses
+3. ⛩📰 书社 identifies all of the source files and includes and uses
     `build/magic.mgc` to classify them by media type.
 
     `build/magic.mgc` to classify them by media type.
 
-4. ⛩📰 书社 parses all plaintext and X·M·L source files and includes
+4. ⛩📰 书社 parses all plaintext and X·M·L source files and includes
     and then builds a dependency tree between them.
 
     and then builds a dependency tree between them.
 
-5. ⛩📰 书社 uses the dependency tree to establish prerequisites for
+5. ⛩📰 书社 uses the dependency tree to establish prerequisites for
     each output file.
 
     each output file.
 
-6. ⛩️📰 书社 compiles each output file to `build/public`.
+6. ⛩📰 书社 compiles each output file to `build/result`.
+
+7. ⛩📰 书社 copies most output files from `build/result` to
+     `build/public`, but it does some additional processing instead on
+     those which indicate a non‐X·M·L desired final output form.
 
 
-7. ⛩️📰 书社 copies the output files to `public`.
+8. ⛩📰 书社 copies the final resulting files to `public`.
 
 You can use `make list` to list each identified source file or include
   alongside its computed type and dependencies.
 
 You can use `make list` to list each identified source file or include
   alongside its computed type and dependencies.
@@ -79,56 +175,63 @@ As this is a Make‐based program, steps will only be run if the
   corresponding buildfile or output file is older than its
   prerequisites.
 
   corresponding buildfile or output file is older than its
   prerequisites.
 
-## Namespaces
+## Name·spaces
 
 
-The ⛩️📰 书社 namespace is `urn:fdc:ladys.computer:20231231:Shu1She4`.
+The ⛩📰 书社 name·space is `urn:fdc:ladys.computer:20231231:Shu1She4`.
 
 
-This document uses a few namespace prefixes, with the following
+This document uses a few name·space prefixes, with the following
   meanings :⁠—
 
   meanings :⁠—
 
-|   Prefix | Expansion                                  |
-| -------: | :----------------------------------------- |
-|  `html:` | `http://www.w3.org/1999/xhtml`             |
-| `xlink:` | `http://www.w3.org/1999/xlink`             |
-|  `xslt:` | `http://www.w3.org/1999/XSL/Transform`     |
-|  `书社:` | `urn:fdc:ladys.computer:20231231:Shu1She4` |
+|     Prefix | Expansion                                     |
+| ---------: | :-------------------------------------------- |
+| `catalog:` | `urn:oasis:names:tc:entity:xmlns:xml:catalog` |
+|    `exsl:` | `http://exslt.org/common`                     |
+| `exslstr:` | `http://exslt.org/strings`                    |
+|    `html:` | `http://www.w3.org/1999/xhtml`                |
+|     `svg:` | `http://www.w3.org/2000/svg`                  |
+|   `xlink:` | `http://www.w3.org/1999/xlink`                |
+|    `xslt:` | `http://www.w3.org/1999/XSL/Transform`        |
+|    `书社:` | `urn:fdc:ladys.computer:20231231:Shu1She4`    |
 
 ## Setup and Configuration
 
 
 ## Setup and Configuration
 
-⛩📰 书社 depends on the following programs to run.
+⛩📰 书社 depends on the following programs to run.
 In every case, you may supply your own implementation by overriding the
   corresponding (allcaps) variable (e·g, set `MKDIR` to supply your own
   `mkdir` implementation).
 
 - `awk`
 - `cat`
 In every case, you may supply your own implementation by overriding the
   corresponding (allcaps) variable (e·g, set `MKDIR` to supply your own
   `mkdir` implementation).
 
 - `awk`
 - `cat`
+- `cd`
 - `cksum`
 - `cp`
 - `date`
 - `cksum`
 - `cp`
 - `date`
-- `echo`
+- `diff`
 - `file`
 - `find`
 - `git` (optional; set `GIT=` to disable)
 - `file`
 - `find`
 - `git` (optional; set `GIT=` to disable)
+- `grep`
 - `ln`
 - `ln`
-- `mkdir` (requires support for `-p`)
+- `mkdir`
 - `mv`
 - `mv`
-- `od` (requires support for `-t x1`)
+- `od`
+- `pax` (only when generating archives)
 - `printf`
 - `rm`
 - `sed`
 - `sleep`
 - `printf`
 - `rm`
 - `sed`
 - `sleep`
-- `stat`
 - `test`
 - `touch`
 - `test`
 - `touch`
-- `tr` (requires support for `-d`)
-- `uuencode` (requires support for `-m` and `-r`)
-- `xargs` (requires support for `-0`)
+- `tr`
+- `uuencode`
+- `uudecode`
+- `xargs`
 - `xmlcatalog` (provided by `libxml2`)
 - `xmllint` (provided by `libxml2`)
 - `xsltproc` (provided by `libxslt`)
 
 The following additional variables can be used to control the behaviour
 - `xmlcatalog` (provided by `libxml2`)
 - `xmllint` (provided by `libxml2`)
 - `xsltproc` (provided by `libxslt`)
 
 The following additional variables can be used to control the behaviour
-  of ⛩📰 书社 :⁠—
+  of ⛩📰 书社 :⁠—
 
 - **`SRCDIR`:**
   The location of the source files (default: `sources`).
 
 - **`SRCDIR`:**
   The location of the source files (default: `sources`).
@@ -144,7 +247,7 @@ The following additional variables can be used to control the behaviour
 - **`BUILDDIR`:**
   The location of the (temporary) build directory (default: `build`).
   `make clean` will delete this, and it is recommended that it not be
 - **`BUILDDIR`:**
   The location of the (temporary) build directory (default: `build`).
   `make clean` will delete this, and it is recommended that it not be
-    used for programs aside from ⛩📰 书社.
+    used for programs aside from ⛩📰 书社.
 
 - **`DESTDIR`:**
   The location of directory to output files to (default: `public`).
 
 - **`DESTDIR`:**
   The location of directory to output files to (default: `public`).
@@ -160,10 +263,10 @@ The following additional variables can be used to control the behaviour
     ensure stale content is removed.
 
 - **`THISDIR`:**
     ensure stale content is removed.
 
 - **`THISDIR`:**
-  The location of the ⛩📰 书社 `GNUmakefile`.
+  The location of the ⛩📰 书社 `GNUmakefile`.
   This should be set automatically when calling Make and shouldn’t ever
     need to be set manually.
   This should be set automatically when calling Make and shouldn’t ever
     need to be set manually.
-  This variable is used to find the ⛩📰 书社 `lib/` folder, which is
+  This variable is used to find the ⛩📰 书社 `lib/` folder, which is
     expected to be in the same location.
 
 - **`MAGIC`:**
     expected to be in the same location.
 
 - **`MAGIC`:**
@@ -180,6 +283,8 @@ The following additional variables can be used to control the behaviour
     those which end with a cloparen, and those which contain a hash,
     buck, percent, asterisk, colon, semi, eroteme, bracket, backslash,
     or pipe.
     those which end with a cloparen, and those which contain a hash,
     buck, percent, asterisk, colon, semi, eroteme, bracket, backslash,
     or pipe.
+  It is important that these rules not produce any output, as anything
+    printed to `stdout` will be considered a result of the find.
 
 - **`EXTRAFINDRULES`:**
   The value of this variable is appended to `FINDRULES` by default, to
 
 - **`EXTRAFINDRULES`:**
   The value of this variable is appended to `FINDRULES` by default, to
@@ -211,17 +316,31 @@ The following additional variables can be used to control the behaviour
     enable additional transforms without overriding the existing ones.
 
 - **`XMLTYPES`:**
     enable additional transforms without overriding the existing ones.
 
 - **`XMLTYPES`:**
-  A white·space‐separated list of media types to consider X·M·L
-    (default: `application/xml text/xml`).
+  A white·space‐separated list of media types or media type suffixes to
+    consider X·M·L (default: `application/xml text/xml +xml`).
+
+- **`FINALIZE`:**
+  A program to run on (unspecial) X·M·L files after they are
+    transformed (default: `xmllint --nonet --nsclean`).
+  This variable can be used for postprocessing.
 
 - **`THISREV`:**
 
 - **`THISREV`:**
-  The current version of ⛩📰 书社 (default: derived from the current
+  The current version of ⛩📰 书社 (default: derived from the current
     git tag/branch/commit).
 
 - **`SRCREV`:**
   The current version of the source files (default: derived from the
     current git tag/branch/commit).
 
     git tag/branch/commit).
 
 - **`SRCREV`:**
   The current version of the source files (default: derived from the
     current git tag/branch/commit).
 
+- **`QUIET`:**
+  If this variable has a value, informative messages will not be
+    printed (default: empty).
+  Informative messages print to stderr, not stdout, so disabling them
+    usually shouldn’t be necessary.
+  This does not (cannot) disable messages from Make itself, for which
+    the `-s`, `--silent` ∕ `--quiet` Make option is more likely to be
+    useful.
+
 - **`VERBOSE`:**
   If this variable has a value, every recipe instruction will be
     printed when it runs (default: empty).
 - **`VERBOSE`:**
   If this variable has a value, every recipe instruction will be
     printed when it runs (default: empty).
@@ -254,11 +373,11 @@ Source files whose media type does not have an associated X·S·L·T
   contain Ascii white·space, colons (`:`), semis (`;`), pipes (`|`),
   bucks (`$`), percents (`%`), hashes (`#`), asterisks (`*`), brackets
   (`[` or `]`), erotemes (`?`), backslashes (`\`), or control
   contain Ascii white·space, colons (`:`), semis (`;`), pipes (`|`),
   bucks (`$`), percents (`%`), hashes (`#`), asterisks (`*`), brackets
   (`[` or `]`), erotemes (`?`), backslashes (`\`), or control
-  characters, must not begin with a hyphen‐minus (`-`), and must not
-  end with a cloparen (`)`).**
+  characters, must not begin with a hyphen‐minus (`-`), and must not end
+  with a cloparen (`)`).**
 The former characters have the potential to conflict with make syntax,
 The former characters have the potential to conflict with make syntax,
-  a leading hyphen‐minus is confusable for a command‐line argument, and
-  trailing cloparen [activates a bug in G·N·U Make
+  a leading hyphen‐minus is confusable for a commandline argument, and a
+  trailing cloparen [activates a bug in G·N·U Make
   3.81](https://stackoverflow.com/questions/17148468/capturing-filenames-including-parentheses-with-gnu-makes-wildcard-function#comment24825307_17148894).
 
 ## Parsers
   3.81](https://stackoverflow.com/questions/17148468/capturing-filenames-including-parentheses-with-gnu-makes-wildcard-function#comment24825307_17148894).
 
 ## Parsers
@@ -266,7 +385,7 @@ The former characters have the potential to conflict with make syntax,
 Parsers are used to convert plaintext files into X·M·L trees, as well
   as convert plaintext formats which are already included inline in
   existing source X·M·L documents.
 Parsers are used to convert plaintext files into X·M·L trees, as well
   as convert plaintext formats which are already included inline in
   existing source X·M·L documents.
-⛩📰 书社 comes with some parsers; namely :⁠—
+⛩📰 书社 comes with some parsers; namely :⁠—
 
 - **`parsers/plain.xslt`:**
   Wraps `text/plain` contents in a `<html:pre>` element.
 
 - **`parsers/plain.xslt`:**
   Wraps `text/plain` contents in a `<html:pre>` element.
@@ -279,11 +398,11 @@ Parsers are used to convert plaintext files into X·M·L trees, as well
   Converts `text/tab-separated-values` contents into an `<html:table>`
     element.
 
   Converts `text/tab-separated-values` contents into an `<html:table>`
     element.
 
-New ⛩📰 书社 parsers which target plaintext formats should have an
+New ⛩📰 书社 parsers which target plaintext formats should have an
   `<xslt:template>` element with no `@name` or `@mode` and whose
   `@match` attribute…
 
   `<xslt:template>` element with no `@name` or `@mode` and whose
   `@match` attribute…
 
-- Starts with an appropriately‐namespaced qualified name for a
+- Starts with an appropriately‐name·spaced qualified name for a
     `<html:script>` element.
 
 - Follows this with the string `[@type=`.
     `<html:script>` element.
 
 - Follows this with the string `[@type=`.
@@ -311,7 +430,7 @@ For example, the trivial `text/plain` parser is defined as follows :⁠—
 </transform>
 ```
 
 </transform>
 ```
 
-⛩📰 书社 will scan the provided parsers for this pattern to determine
+⛩📰 书社 will scan the provided parsers for this pattern to determine
   the set of allowed plaintext file types.
 Multiple such `<xslt:template>` elements may be provided in a single
   parser, for example if the parser supports multiple media types.
   the set of allowed plaintext file types.
 Multiple such `<xslt:template>` elements may be provided in a single
   parser, for example if the parser supports multiple media types.
@@ -340,28 +459,32 @@ Parsers are applied *prior* to embedding (and can be used to generate
   embeds); transforms are applied *after*.
 
 It is **strongly recommended** that auxillary templates in parsers be
   embeds); transforms are applied *after*.
 
 It is **strongly recommended** that auxillary templates in parsers be
-  namespaced (by `@name` or `@mode`) whenever possible, to avoid
+  name·spaced (by `@name` or `@mode`) whenever possible, to avoid
   conflicts between parsers.
 
 ### Attributes added during parsing
 
   conflicts between parsers.
 
 ### Attributes added during parsing
 
-⛩️📰 书社 will add a few attributes to the output of the parsing step,
-  namely :⁠—
+⛩📰 书社 will add a few attributes to elements which result from
+  parsing plaintext `<html:script>` elements.
+These include :⁠—
 
 
-- A `@书社:cksum` attribute on toplevel result elements, giving the
-    `cksum` checksum of the corresponding source file.
+- A `@书社:parsed-by` attribute, giving a space‐separated list of
+    parsers which parsed the node.
+  (Generally, this will be a list of one, but it is possible for the
+    result of a parse to be another plaintext node, which may be parsed
+    by a different parser.)
 
 
-- For the elements which result from parsing plaintext `<html:script>`
-    elements :⁠—
+- A `@书社:media-type` attribute, giving the identified media type of
+    the plaintext node.
 
 
-  - A `@书社:parsed-by` attribute, giving a space‐separated list of
-      parsers which parsed the node.
-    (Generally, this will be a list of one, but it is possible for the
-      result of a parse to be another plaintext node, which may be
-      parsed by a different parser.)
+## Output Redirection
 
 
-  - A `@书社:media-type` attribute, giving the identified media type of
-      the plaintext node.
+By default, ⛩📰 书社 installs files to the same location in `DESTDIR`
+  as they were placed in their `SRCDIR`.
+This behaviour can be customized by setting the `@书社:destination`
+  attribute on the root element, whose value can give a different path.
+This attribute is read after parsing, but before transformation (where
+  it is silently dropped).
 
 ## Embedding
 
 
 ## Embedding
 
@@ -379,41 +502,53 @@ Embeds are replaced with the parsed contents of a file, unless the file
   is an asset, in which case an `<html:object>` element is produced
   instead (with the contents of the asset file provided as a base64
   `data:` u·r·i).
   is an asset, in which case an `<html:object>` element is produced
   instead (with the contents of the asset file provided as a base64
   `data:` u·r·i).
+Embed replacements will be given a `@书社:identifier` attribute whose
+  value will match the `@xlink:href` of the embed.
 
 Embedding takes place after parsing but before transformation, so
   parsers are able to generate their own embeds.
 
 Embedding takes place after parsing but before transformation, so
   parsers are able to generate their own embeds.
-⛩📰 书社 is able to detect the transitive embed dependencies of files
+⛩📰 书社 is able to detect the transitive embed dependencies of files
   and update them accordingly; it will signal an error if the
   dependencies are recursive.
 
   and update them accordingly; it will signal an error if the
   dependencies are recursive.
 
-## Output Redirection
+### Attributes added during expansion
 
 
-By default, ⛩️📰 书社 installs files to the same location in `DESTDIR`
-  as they were placed in their `SRCDIR`.
-This behaviour can be customized by setting the `@书社:destination`
-  attribute on the root element, whose value can give a different path.
-This attribute is read after parsing, but before transformation (where
-  it is silently dropped).
+⛩📰 书社 will add a few attributes to toplevel result elements, both
+  in the main document and any embedded documents, during the expansion
+  phase prior to the main transformation.
+These include :⁠—
+
+- A `@书社:cksum` attribute giving the `cksum` checksum of the
+    corresponding source file.
+
+- A `@书社:mtime` attribute giving the last modified time of the
+    corresponding source file.
+
+- A `@书社:identifier` attribute giving the ⛩📰 书社 identifier
+    (i·e, starting with `about:shushe?`) of the corresponding source
+    file.
+
+- For elements in the `html` namespace, an `itemscope` attribute and an
+    `itemtype` attribute with a value of
+    `urn:fdc:ladys.computer:20231231:Shu1She4:document` (for the main
+    document) or `urn:fdc:ladys.computer:20231231:Shu1She4:embed` (for
+    embedded documents).
+  These attributes are used to scope any nested `<html:meta>` elements
+    with `@itemprop` attributes to their containing documents.
 
 ## Transforms
 
 Transforms are used to convert X·M·L files into their final output,
   after all necessary parsing and embedding has taken place.
 
 ## Transforms
 
 Transforms are used to convert X·M·L files into their final output,
   after all necessary parsing and embedding has taken place.
-⛩️📰 书社 comes with some transforms; namely :⁠—
-
-- **`transforms/attributes.xslt`:**
-  Applies transforms to the children of any `<书社:apply-attributes>`
-    elements, and then applies the attributes of the
-    `<书社:apply-attributes>` to each result child, replacing the
-    element with the result.
-  This is useful in combination with image embeds to apply alt‐text to
-    the resulting `<html:img>`.
+⛩📰 书社 comes with some transforms; namely :⁠—
 
 - **`transforms/asset.xslt`:**
   Converts `<html:object>` elements which correspond to recognized
     media types into the appropriate H·T·M·L elements, and deletes
     `<html:style>` elements from the body of the document and moves
     them to the head.
 
 - **`transforms/asset.xslt`:**
   Converts `<html:object>` elements which correspond to recognized
     media types into the appropriate H·T·M·L elements, and deletes
     `<html:style>` elements from the body of the document and moves
     them to the head.
+  This conversion happens during the application phase, after the main
+    transformation.
 
 - **`transforms/metadata.xslt`:**
   Provides basic `<html:head>` metadata.
 
 - **`transforms/metadata.xslt`:**
   Provides basic `<html:head>` metadata.
@@ -423,11 +558,38 @@ Transforms are used to convert X·M·L files into their final output,
   - **`urn:fdc:ladys.computer:20231231:Shu1She4:title`:**
     Provides the title of the page.
 
   - **`urn:fdc:ladys.computer:20231231:Shu1She4:title`:**
     Provides the title of the page.
 
-  ⛩️📰 书社 automatically encapsulates embeds so that their metadata
-    does not propogate up to the embedding document.
+  ⛩📰 书社 automatically encapsulates H·T·M·L embeds so that their
+    metadata does not propogate up to the embedding document.
   To undo this behaviour, remove the `@itemscope` and `@itemtype`
     attributes from the embed during the transformation phase.
 
   To undo this behaviour, remove the `@itemscope` and `@itemtype`
     attributes from the embed during the transformation phase.
 
+- **`transforms/serialization.xslt`:**
+  Replaces `<书社:serialize-xml>` elements with the (escaped)
+    serialized X·M·L of their contents.
+  This replacement happens during the application phase, after most
+    other transformations have taken place.
+
+  If a `@with-namespaces` attribute is provided, any name·space nodes
+    on the toplevel serialized elements whose U·R·I’s correspond to the
+    definitions of the provided prefixes, as defined for the
+    `<书社:serialize-xml>` element, will be declared using name·space
+    attributes on the serialized elements.
+  Otherwise, only name·space nodes which _differ_ from the definitions
+    on the `<书社:serialize-xml>` element will be declared.
+  The string `#default` may be used to represent the default
+    name·space.
+  Multiple prefixes may be provided, separated by white·space.
+
+  When it comes to name·spaces used internally by ⛩📰 书社, the
+    prefix used by ⛩📰 书社 may be declared _in addition to_ the
+    prefix(es) used in the source document(s).
+  It is not possible to selectively only declare one prefix for a
+    name·space to the exclusion of others.
+
+  `<书社:raw-output>` elements may be used inside of
+    `<书社:serialize-xml>` elements to inject raw output into the
+    serialized X·M·L.
+
 The following are recommendations on effective creation of
   transforms :⁠—
 
 The following are recommendations on effective creation of
   transforms :⁠—
 
@@ -435,10 +597,10 @@ The following are recommendations on effective creation of
   It is likely an error if two transforms have templates which match
     the same element (unless the templates have different priority).
 
   It is likely an error if two transforms have templates which match
     the same element (unless the templates have different priority).
 
-- Namespace templates (with `@name` or `@mode`) whenever possible.
+- Name·space templates (with `@name` or `@mode`) whenever possible.
 
 - Set `@exclude-result-prefixes` on the root `xslt:transform` element
 
 - Set `@exclude-result-prefixes` on the root `xslt:transform` element
-    to reduce the number of declared namespaces in the final result.
+    to reduce the number of declared name·spaces in the final result.
 
 ## Global Params
 
 
 ## Global Params
 
@@ -448,33 +610,29 @@ The following params are made available globally in parsers and
 - **`BUILDTIME`:**
   The current time.
 
 - **`BUILDTIME`:**
   The current time.
 
-- **`CKSUM`:**
-  The checksum of the source file (⅌ `cksum`).
+- **`IDENTIFIER`:**
+  The ⛩📰 书社 identifier of the source file (a u·r·i beginning with
+    `about:shushe`).
 
 - **`SRCREV`:**
   The value of the `SRCREV` variable (if present).
 
 
 - **`SRCREV`:**
   The value of the `SRCREV` variable (if present).
 
-- **`SRCTIME`:**
-  The time at which the source file was last modified.
-
 - **`THISREV`:**
   The value of the `THISREV` variable (if present).
 
 - **`THISREV`:**
   The value of the `THISREV` variable (if present).
 
-The following params are only available in transforms :⁠—
-
-- **`CATALOG`:**
-  The path of the catalog file (within `BUILDDIR`).
-
-- **`PATH`:**
-  The path of the output file (within `DESTDIR`).
-
 ## Output Wrapping
 
 ## Output Wrapping
 
-⛩️📰 书社 will wrap the final output of the transforms in appropriate
-  `<html:html>` and `<html:body>` elements, so it is not necessary for
-  transforms to do this explicitly.
-After performing the initial transform, ⛩️📰 书社 will match the root
-  node of the result in the following modes to fill in areas of the
+Provided at least one toplevel result element belongs to the H·T·M·L
+  namespace, ⛩📰 书社 will wrap the final output of the transforms in
+  appropriate `<html:html>` and `<html:body>` elements, so it is not
+  necessary for transforms to do this explicitly.
+If a toplevel result element _is_ a `<html:html>` and `<html:body>`
+  element, it will be merged with the one that ⛩📰 书社 creates.
+Consequently, wrapping the result in a `<html:body>` element can be
+  used to enable wrapping for non‐H·T·M·L content, when desired.
+
+As a part of this process, after performing the initial transform
+  ⛩📰 书社 will match in the following modes to fill in areas of the
   wrapper :⁠—
 
 - **`书社:header`:**
   wrapper :⁠—
 
 - **`书社:header`:**
@@ -489,16 +647,13 @@ After performing the initial transform, ⛩️📰 书社 will match the root
   The result of matching in this mode is inserted into the
     `<html:head>` of the output.
 
   The result of matching in this mode is inserted into the
     `<html:head>` of the output.
 
-In addition to being called with the transform result, each of these
-  modes will additionally be called with a `<xslt:include>` element
-  corresponding to each transform.
-If a transform has a `<书社:id>` top‐level element whose value is an
-  i·r·i, its `<xslt:include>` element will have a corresponding
-  `@书社:id` attribute.
-This mechanism can be used to allow transforms to insert content
-  without matching any elements in the result; for example, the
-  following transform adds a link to a stylesheet to the `<html:head>`
-  of every page :⁠—
+The document being matched will contain the full transform result
+  prior to wrapping as well as an `<书社:id>` element for each
+  transform.
+The latter elements can be matched to enable transforms to provide
+  content _without_ matching any elements in the result; for example,
+  the following transform adds a link to a stylesheet to the
+  `<html:head>` of every page :⁠—
 
 ```xml
 <?xml version="1.0"?>
 
 ```xml
 <?xml version="1.0"?>
@@ -511,7 +666,7 @@ This mechanism can be used to allow transforms to insert content
   version="1.0"
 >
   <书社:id>example:add-stylesheet-links.xslt</书社:id>
   version="1.0"
 >
   <书社:id>example:add-stylesheet-links.xslt</书社:id>
-  <template match="xslt:include[@书社:id='example:add-stylesheet-links.xslt']" mode="书社:metadata">
+  <template match="书社:id[string(.)='example:add-stylesheet-links.xslt']" mode="书社:metadata">
     <html:link rel="stylesheet" type="text/css" href="/style.css"/>
   </template>
 </transform>
     <html:link rel="stylesheet" type="text/css" href="/style.css"/>
   </template>
 </transform>
@@ -520,11 +675,71 @@ This mechanism can be used to allow transforms to insert content
 Output wrapping can be entirely disabled by adding a
   `@书社:disable-output-wrapping` attribute to the top‐level element in
   the result tree.
 Output wrapping can be entirely disabled by adding a
   `@书社:disable-output-wrapping` attribute to the top‐level element in
   the result tree.
+It will not be performed on outputs whose root elements are
+  `<书社:archive>`, `<书社:base64-binary>`, or `<书社:raw-text>`
+  (described below), or on result trees which do not contain a toplevel
+  element in the H·T·M·L namespace.
+
+## Applying Attributes
+
+The `<书社:apply-attributes>` element will apply any attributes on the
+  element to the element(s) it wraps.
+It is especially useful in combination with embeds.
+
+The `<书社:apply-attributes-to-root>` element will apply any attributes
+  on the element to the root node of the final transformation result.
+It is especially useful in combination with output wrapping.
+
+In both cases, attributes from various sources are combined with
+  white·space between them.
+Attribute application takes place after all ordinary transforms have
+  completed.
+
+Both elements ignore attributes in the `xml:` name·space, except for
+  `@xml:lang`, which ignores all but the first definition (including
+  any already present on the root element).
+On H·T·M·L and S·V·G elements, `@lang` has the same behaviour as
+  `@xml:lang`.
+
+## Other Kinds of Output
+
+There are a few special elements in the `书社:` name·space which, if
+  they appear as the toplevel element in a transformation result, cause
+  ⛩📰 书社 to produce something other than an X·M·L file.
+They are :⁠—
+
+- **`<书社:archive>`:**
+  Each child element with a `@书社:archived-as` attribute will be
+    archived as a separate file in a resulting tarball (this attribute
+    gives the file name).
+  These elements will be processed the same as the root elements of any
+    other file (e·g, they will be wrapped; they can themselves specify
+    non X·M·L output types, ⁊·c).
+  Other child elements will be ignored.
+
+  If the `<书社:archive>` element is given an `@书社:expanded`
+    attribute, rather than producing a tarball ⛩📰 书社 will output
+    the directory which expanding the tarball would produce.
+  This mechanism can be used to generate multiple files from a single
+    source, provided all of the files are contained with·in the same
+    directory.
+
+- **`<书社:base64-binary>`:**
+  The text nodes in the transformation result will, after removing all
+    Ascii whitespace, be treated as a Base·64 string, which is then
+    decoded.
+
+- **`<书社:raw-text>`:**
+  A plaintext (U·T·F‐8) file will be produced from the text nodes in
+    the transformation result.
 
 ## License
 
 
 ## License
 
-Source files are licensed under the terms of the <cite>Mozilla Public
-  License, version 2.0</cite>.
-For more information, see [LICENSE](./LICENSE).
+This repository conforms to [REUSE][].
+
+Most source files are licensed under the terms of the <cite>Mozilla
+  Public License, version 2.0</cite>.
 
 
+[REUSE]: <https://reuse.software/spec/>
 [draft-phillips-record-jar-01]: <https://datatracker.ietf.org/doc/html/draft-phillips-record-jar-01>
 [draft-phillips-record-jar-01]: <https://datatracker.ietf.org/doc/html/draft-phillips-record-jar-01>
+[rdar-92753335]: <https://github.com/apple-oss-distributions/patch_cmds/blob/5084833f90df1b0e0924ea56f94c0199b3b8bbc6/diff/diffreg.c#L1800-L1808>
This page took 0.039403 seconds and 4 git commands to generate.