+# SPDX-FileCopyrightText: 2023, 2024 Lady <https://www.ladys.computer/about/#lady>
+# SPDX-License-Identifier: MPL-2.0
+
SHELL = /bin/sh
# ━ § BASIC INFORMATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
override define makefileinfo
╭────────────────────────────╮
-╔╡ ⁌ ⛩️📰 书社 ∷ GNUmakefile ╞════════════════════════════════╗
+╔╡ ⁌ ⛩📰 书社 ∷ GNUmakefile ╞═════════════════════════════════╗
║╰────────────────────────────╯ ║
╟┬ ¶ Prerequisites ───────────────────────────────────────────┬╢
║│ │║
-║│ Requires G·N·U Make, at least version 3.81, a version of │║
-║│ uuencode with base64 support, and the various programs │║
-║│ offered by libxml2 and libxslt. Beyond this, only programs │║
-║│ required by Posix are used, altho there is a chance of │║
-║│ version incompatibilities. The full list of program │║
+║│ Requires G·N·U Make, at least version 3.81, the Fine Free │║
+║│ File Command, and the various programs packaged with │║
+║│ libxml2 and libxslt. Beyond this, only programs specified │║
+║│ by Posix are required. The full list of program │║
║│ requirements is as follows :— │║
║│ │║
║│ • awk │║
║│ • cat │║
+║│ • cd │║
+║│ • cksum │║
║│ • cp │║
║│ • date │║
-║│ • echo │║
-║│ • file │║
+║│ • diff (with -u) │║
+║│ • file (specifically the Fine Free File Command) │║
║│ • find │║
-║│ • mkdir (requires support for `-p´) │║
+║│ • grep │║
+║│ • git (optional) │║
+║│ • ln │║
+║│ • make (specifically G·N·U Make, version 3.81 or later) │║
+║│ • mkdir │║
║│ • mv │║
-║│ • od (requires support for `-t x1´) │║
+║│ • od │║
+║│ • pax (ustar format, when generating archives) │║
║│ • printf │║
║│ • rm │║
║│ • sed │║
║│ • sleep │║
-║│ • stat │║
║│ • test │║
║│ • touch │║
-║│ • tr (requires support for `-d´) │║
-║│ • uuencode (requires support for `-m´ and `-r´) │║
-║│ • xargs (requires support for `-0´) │║
+║│ • tr │║
+║│ • uuencode │║
+║│ • uudecode │║
+║│ • xargs │║
║│ • xmlcatalog (provided by libxml2) │║
║│ • xmllint (provided by libxml2) │║
║│ • xsltproc (provided by libxslt) │║
║╰────────────────────────────────────────────────────────────╯║
╟┬ ¶ Usage ───────────────────────────────────────────────────┬╢
║│ │║
-║│ • `make all´: Compile, but do not install, all files. │║
+║│ • `make all´ (default): Compile, but do not install, all │║
+║│ files. │║
║│ │║
║│ • `make clean´: Remove `BUILDDIR´. │║
║│ │║
-║│ • `make gone´: Remove installed files. │║
+║│ • `make gone´: Remove `BUILDDIR´ and installed files. │║
║│ │║
-║│ • `make help´ (default): Print this message. │║
+║│ • `make help´: Print this message. │║
║│ │║
║│ • `make install´: Compile all files and install in │║
║│ `DESTDIR´. │║
║│ • `make list´: List all recognized source files and their │║
║│ classification (including media type and dependencies). │║
║│ │║
+║│ • `make listout´: List out the destinations of all │║
+║│ resulting files (relative to `DESTDIR´), e·g for │║
+║│ processing by another script. │║
+║│ │║
+║│ • `make uninstall´: Remove installed files, but not │║
+║│ `BUILDDIR´. │║
+║│ │║
║│ Set `VERBOSE=1´ to see the text of commands as they are │║
║│ executed. │║
║│ │║
║╰────────────────────────────────────────────────────────────╯║
╟┬ ¶ Copyright & License ─────────────────────────────────────┬╢
║│ │║
-║│ Copyright © 2023–2024 Lady [@ Lady’s Computer]. │║
+║│ Copyright © 2023–2024 Lady [@ Ladys Computer]. │║
║│ │║
║│ This Source Code Form is subject to the terms of the │║
║│ Mozilla Public License, v 2.0. If a copy of the M·P·L was │║
# Programs needed to run this make·file.
#
-# If these are not installed on your computer, or you need to use a
-# different implementation, you can override the appropriate variable.
+# If these are not installed on your computer, or you need to use a different implementation, you can override the appropriate variable.
AWK := awk
CAT := cat
+CD := cd
+CKSUM := cksum
CP := cp
DATE := date
-ECHO := echo
+DIFF := diff
FILE := file
FIND := find
+GIT := git
+GREP := grep
+LN := ln
MKDIR := mkdir
MV := mv
OD := od
+PAX := pax
PRINTF := printf
RM := rm
SED := sed
SLEEP := sleep
-STAT := stat
TEST := test
TOUCH := touch
TR := tr
+UUDECODE := uudecode
UUENCODE := uuencode
XARGS := xargs
XMLCATALOG := xmlcatalog
XMLLINT := xmllint
XSLTPROC := xsltproc
+# This variable is not used in normal execution.
+#
+# In the archiving `MODE´, it provides the X·M·L file from which the archive should be constructed.
+SRC :=
+
+# This variable is not used in normal execution.
+#
+# In the archiving `MODE´, it provides a user‐friendly name for the archive.
+NAME :=
+
# The directory which contains the source files.
#
-# Multiple directories can be given so long as files with the same name
-# do not exist in each.
+# Multiple directories can be given so long as files with the same name do not exist in each.
SRCDIR := sources
-# The directory which contains “includes”: Files which may be included
-# in other files but for which no final output will be generated.
+# The directory which contains “includes”:
+# Files which may be included in other files but for which no final output will be generated.
#
-# Multiple directories can be given so long as files with the same name
-# do not exist in each.
+# Multiple directories can be given so long as files with the same name do not exist in each.
#
# These can be inside of `SRCDIR´ directories if desired.
-INCLUDEDIR := sources/includes
+#
+# This variable is also used by the two‐stage `MODE´, where it gives the include directory for the second stage.
+INCLUDEDIR := $(foreach dir,$(SRCDIR),$(dir)/includes)
+
+# The directory which contains the data files.
+#
+# Only used in the two‐stage `MODE´, and defaults to that `MODE´ if this directory exists.
+# This directory is used as the include directory in the first stage.
+#
+# Multiple directories can be given so long as files with the same name do not exist in each.
+DATADIR :=
# The directory in which to generate temporary buildfiles.
+#
+# This variable is also used by the archiving and two‐stage `MODE´s.
BUILDDIR := build
# The directory into which to output files on `make install´.
+#
+# This variable is also used by the archiving `MODE´.
DESTDIR := public
-# The location of this Makefile (and related ⛩️📰 书社 files),
-# relative to the current working directory.
+# The location of this Makefile (and related ⛩📰 书社 files), relative to the current working directory.
#
# By default, this is inferred from the variable `MAKEFILE_LIST´.
+#
+# This variable is also used by the archiving and two‐stage `MODE´s.
THISDIR := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST))))
-# The location of the magic files to use when determining media types.
+# Configuration of `find´.
#
-# One is provided as part of this repository, but you can override it
-# if you need different media type detection.
+# By default, `find´ will ignore files which begin with a period and those which are likely to cause problems for `make´.
#
-# Your computer probably has a more comprehensive one installed at
-# `/usr/share/file/magic´, but it is not recommended that you use this
-# directly. Instead, link or copy just the files you expect to need for
-# your project.
-MAGICDIR := $(patsubst ./%,%,$(THISDIR)/magic)
+# These variables are also used by the two‐stage `MODE´.
+EXTRAFINDRULES :=
+EXTRAFINDINCLUDERULES :=
+FINDRULES := '!' '(' '(' -name '[.-]*' -a '!' -name '.' -o -name '*[][*?:|$$%\#\\; ]*' -o -name '*[)]' ')' -a -prune ')'$(if $(EXTRAFINDRULES), -a '(' $(EXTRAFINDRULES) ')',)
+FINDINCLUDERULES := $(FINDRULES)$(if $(EXTRAFINDINCLUDERULES), -a '(' $(EXTRAFINDINCLUDERULES) ')',)
-# Configuration of `find´.
+# File extensions which indicate files in `SRCDIR´ which should be built as part of the first, rather than second, stage of the two‐stage `MODE´.
+DATAEXT := rdf
+
+# Rules for identifying files in `SRCDIR´ which should be built as part of the first, rather than second, stage of the two‐stage `MODE´.
+#
+# By default, this just constructs rules from `DATAEXT´.
+EXTRAFINDDATARULES :=
+FINDDATARULES := -name '.' $(foreach ext,$(DATAEXT), -o -name '$(subst ','"'"',[!.]*.$(ext))')$(if $(EXTRAFINDDATARULES), -a '(' $(EXTRAFINDDATARULES) ')',)
+
+# The list of magic files to use when determining media types.
+#
+# Some are provided as part of this repository, but you can add more if you need different media type detection.
+#
+# Your computer probably has several already installed at `/usr/share/file/magic´.
+EXTRAMAGIC :=
+MAGIC := $(sort $(patsubst ./%,%,$(wildcard $(THISDIR)/magic/*)) $(EXTRAMAGIC))
+
+# The list of depedencies for parsers.
#
-# By default, `find´ will not follow symlinks and will use extended
-# regular expressions, ignoring hidden files and those which begin with
-# a period.
-FINDRULES := -flags -nohidden -and ! '(' '(' -name '[.-]*' -or -name '*[:|$$%]*' ')' -and -prune ')'
-FINDINCLUDERULES := $(FINDRULES)
+# When these files change, the assumption is that the result of the parsers will change as well, even if the parsers themselves have not.
+EXTRAPARSERLIBS :=
+PARSERLIBS := $(sort $(THISDIR)/lib/split.xslt $(EXTRAPARSERLIBS))
# The list of parsers for plaintext file types.
#
-# Which parsers are provided will influence which kinds of files are
-# recognized as plaintext.
+# Which parsers are provided will influence which kinds of files are recognized as plaintext.
+EXTRAPARSERS :=
+PARSERS := $(sort $(patsubst ./%,%,$(wildcard $(THISDIR)/parsers/*.xslt)) $(EXTRAPARSERS))
+
+# The list of depedencies for transforms.
#
-# Each parser ⁜must⁜ have a template which matches ⁜only⁜ X·H·T·M·L
-# `<script>´ elements that have a `@type´ of a plaintext type supported
-# by the parser. They may have multiple.
-PARSERS := $(patsubst ./%,%,$(wildcard $(THISDIR)/parsers/*.xslt))
+# When these files change, the assumption is that the result of the transforms will change as well, even if the transforms themselves have not.
+EXTRATRANSFORMLIBS :=
+TRANSFORMLIBS := $(sort $(THISDIR)/lib/serialize.xslt $(EXTRATRANSFORMLIBS))
# The list of transforms.
-TRANSFORMS := $(patsubst ./%,%,$(wildcard $(THISDIR)/transforms/*.xslt))
+EXTRATRANSFORMS :=
+TRANSFORMS := $(sort $(patsubst ./%,%,$(wildcard $(THISDIR)/transforms/*.xslt)) $(EXTRATRANSFORMS))
# List of types which should be treated as X·M·L.
-XMLTYPES := application/xml text/xml
+#
+# Types which start with a `+´ are suffixes and match any type which
+# ends accordingly.
+XMLTYPES := application/xml text/xml +xml
+
+# A program to run on basic X·M·L files after they are transformed.
+FINALIZE := $(XMLLINT) --nonet --nsclean
+
+ifdef GIT
+ifneq ($(wildcard $(THISDIR)/.git),)
+# A description of the current git revision of ⛩📰 书社.
+THISREV := $(shell $(CD) $(THISDIR); $(GIT) describe 2>>/dev/null || $(GIT) rev-parse HEAD 2>>/dev/null || :)
+endif
+
+ifneq ($(wildcard .git),)
+# A description of the current git revision of the working directory.
+SRCREV := $(shell $(GIT) describe 2>>/dev/null || $(GIT) rev-parse HEAD 2>>/dev/null || :)
+endif
+endif
+
+# The mode in which to run this make·file.
+# Modes essentially allow for the combination of multiple conceptual make·files into a single source.
+#
+# The following modes are available :—
+#
+# • ‹ urn:fdc:ladys.computer:20231231:Shu1She4:mode:default ›:
+# The default mode; typical ⛩📰 书社 behaviours.
+#
+# • ‹ urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive ›:
+# Generates archive files from parse results.
+#
+# • ‹ urn:fdc:ladys.computer:20231231:Shu1She4:mode:_2stage ›:
+# Two‐stage build; runs ⛩📰 书社 twice.
+MODE := urn:fdc:ladys.computer:20231231:Shu1She4:mode:$(if $(DATADIR),$(shell if $(TEST) -d $(call quote,$(DATADIR)); then $(PRINTF) '%s\n' '_2stage'; else $(PRINTF) '%s\n' 'default'; fi),default)
+
+# Set to a non·empty value to silence informative messages.
+QUIET :=
# Set to a non·empty value to print all commands as they run.
VERBOSE :=
+# Posix locale information.
+LC_ALL := C
+export LC_ALL
+
+# Posix timezone information.
+TZ := UTC0
+export UTC0
+
# The default target for this makefile.
+.DEFAULT_GOAL := all
+
+# Flags for use when calling the shell.
#
-# Print help and exit.
-.DEFAULT_GOAL := help
+# `-e` enables early exit from invocations of multiple commands after
+# the first failure.
+.SHELLFLAGS := -c -e
-# ━ § BEGIN MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# ━ § BEGIN SHARED MAKE·FILE CONSTRUCTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
-# A variable with no value, usable when assigning values which contain
-# whitespace.
+# A variable with no value, usable when assigning values which contain whitespace.
override empty :=
-# A variable which contains a newline, to allow the generation of
-# multiline strings in function calls.
+# A variable which contains a newline, to allow the generation of multiline strings in function calls.
override define newline
# A variable which contains a single comma.
override comma := ,
+# (callable) Make empty strings non·empty, and non·empty strings empty.
+override not = $(if $1,,1)
+
# (callable) Quote the given string for use within shell calls.
override quote = '$(subst ','"'"',$1)'
-# Outputs an `@´ to silence rules, unless `VERBOSE´ is nonempty.
+# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
+
+# Outputs an `@´ to silence rules, unless `VERBOSE´ is non·empty.
override silent := $(if $(VERBOSE),,@)
-# (callable) Escape special characters for use in sed regular
-# expressions.
+# (callable) Only perform the rule if `QUIET` is not set.
+override inform = $(if $(QUIET),,@$1)
+
+# (callable) Check to see if the given directory exists and create it if not.
+override ensuredirectory = if $(TEST) ! -d $(call quote,$1); then $(MKDIR) -p $(call quote,$1); fi
+
+# Quote standard input in such a way that piping it to xargs will result in it being processed as a single argument.
+#
+# If standard input ends in a newline, it is stripped; all other newlines are preserved.
+override xargsquote = $(SED) $(call quote,s/'/'"'"'/g;s/^/'/;s/$$/'/;$$!s/$$/\\/)
+
+# Quote standard input in such a way that piping it to xargs will result in each line being processed as a single argument.
+override xargsmultiquote = $(SED) $(call quote,s/'/'"'"'/g;s/^/'/;s/$$/'/)
+
+# (callable) Test if the provided xpath expression matches the provided document.
+override xpath = $(XMLLINT) --noent --nonet --xpath $(call quote,$1) $(call quote,$2) >>/dev/null 2>>/dev/null
+
+# (callable) Extract the value of the text nodes in the provided X·M·L document and print them to `stdout´.
+override extracttext = $(PRINTF) '%s' '<transform xmlns="http://www.w3.org/1999/XSL/Transform" version="1.0"><output method="text" encoding="UTF-8"/></transform>' | $(XSLTPROC) --nonet --novalid --nomkdir --nowrite - $(call quote,$1)
+
+# (callable) Process the provided transformation result and output the result to the provided location, given the provided relative path.
+override processresultto = if $(call xpath,/*[local-name()="raw-text" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then $(call extracttext,$1) >|$(call quote,$2); elif $(call xpath,/*[local-name()="base64-binary" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then { $(PRINTF) '%s\n' 'begin-base64 644 -'; $(call extracttext,$1) | $(TR) -d '\t\n\f\r '; $(PRINTF) '\n%s\n' '===='; } | $(UUDECODE) -o /dev/stdout >|$(call quote,$2); elif $(call xpath,/*[local-name()="archive" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then $(MAKE) -f $(call quote,$(abspath $(THISDIR)/GNUmakefile)) NAME=$(call quote,$3) SRC=$(call quote,$1) BUILDDIR=$(call quote,$(BUILDDIR)/archive/$3) DESTDIR=$(call quote,$(patsubst %/,%,$(dir $2))) MODE='urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive' $(call quote,$2); else $(FINALIZE) $(call quote,$1) >|$(call quote,$2); fi
+
+# ━ § BEGIN DEFAULT MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+ifeq ($(MODE),urn:fdc:ladys.computer:20231231:Shu1She4:mode:default)
+
+# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
+
+# Non·empty if `help´ or `clean´, and no targets other than `help´ or `clean´, were specified as goals on the commandline.
+override notbuilding := $(and $(filter help clean,$(MAKECMDGOALS)),$(call not,$(filter-out help clean,$(MAKECMDGOALS))))
+
+# (callable) Tests to see if the prerequisites provided by the second argument matches the value in the file corresponding to the first argument in `$(BUILDDIR)/lastprereqs´.
+# If not, saves the new value.
+# Returns the values plus the file in `$(BUILDDIR)/lastprereqs´, which will always be newer than the target if there was a change.
+#
+# Calling this variable is useful when a given target should be updated whenever its list of prerequisites changes in addition to whenever there is a change to one of its prerequisites.
+#
+# If `$(notbuilding)´ is non·empty, this variable produces no result to avoid unnecessary work.
+#
+# ☡ This variable creates at least one subshell every time it is computed.
+override diffprereqs = $(if $(notbuilding),,$(and $(subst $(shell $(CAT) $(call quote,$(BUILDDIR)/lastprereqs/$1) 2>>/dev/null || :),,$2),$(shell $(call ensuredirectory,$(BUILDDIR)/lastprereqs) && $(PRINTF) '%s\n' $(call quote,$2) >|$(BUILDDIR)/lastprereqs/$1),)$2 $(BUILDDIR)/lastprereqs/$1)
+
+# (callable) Escape special characters for use in X·M·L.
+override xmlesc = $(subst >,>,$(subst <,<,$(subst &,&,$1)))
+
+# (callable) Escape special characters for use in X·M·L attributes.
+override attresc = $(subst ",",$(call xmlesc,$1))
+
+# (callable) Escape special characters for use in sed regular expressions.
override sedesc = $(subst /,[/],$(subst $$,\$$,$(subst *,\*,$(subst .,\.,$(subst [,\[,$(subst ^,\^,$(subst \,\\,$1)))))))
+# The command to use for percent‐decoding.
+override perdeccmd := $(SED) 's/|/%7C/g;s/[\]/%5C/g;s/%[0123456789ABCDEFabcdef]\{2\}/|&|/g' | $(TR) '|' '\n' | $(SED) '/^%[0123456789ABCDEFabcdef]\{2\}$$/!s/%/|%25|/' | $(TR) '|' '\n' | $(AWK) '$$0!~/%/{printf "%s",$$0}/%/{d="0123456789ABCDEF";v=substr(toupper($$0),2,2);printf "\\%04o",(index(d,substr(v,1,1))-1)*16+index(d,substr(v,2,1))-1}' | $(xargsquote) | $(XARGS) -E '' $(PRINTF) '%b'
+
# (callable) Percent‐decode the given strings.
-override perdec = $(foreach encoded,$1,$(shell $(PRINTF) '%s\n' $(call quote,$(encoded)) | $(SED) 's/`/`%60`/g;s/[\]/`%5C`/g;s/%[0-9A-Fa-f]\{2\}/`&`/g' | $(TR) '`' '\n' | $(SED) '/^%[0-9A-Fa-f]\{2\}$$/!s/%/`%25`/' | $(TR) '`' '\n' | $(AWK) '$$0!~/%/{printf("%s",$$0)}/%/{sub("%","0x");printf("\\%04o",$$0)}' | $(XARGS) -0 $(PRINTF) '%b'))
+#
+# ☡ This variable creates a subshell every time it is computed.
+override perdec = $(shell $(PRINTF) '%s\0450A' $(foreach encoded,$1,$(call quote,$(encoded))) | $(perdeccmd))
# (callable) Percent‐encode the given strings.
#
-# This singly‐encodes u·r·i characters and doubly‐encodes other
-# characters, then calls `perdec´ to decode back to a single encoding.
-# The encoding assumes the input is a “u·r·i component”; e·g that the
-# resulting string should only contain `pchar´ (but can contain any
-# `sub-delim´).
-override perenc = $(foreach unencoded,$1,$(call perdec,$(shell $(PRINTF) '%s' $(call quote,$(unencoded)) | $(OD) -t x1 | $(SED) 's/^[0-9]*//;s/2[146-9A-Ea-e]/%&/g;s/3[0-9AaBbDd]/%&/g;s/40/%&/g;s/[46][1-9A-Fa-f]/%&/g;s/[57][0-9Aa]/%&/g;s/7[Ee]/%&/g;s/[ ][0-9A-Fa-f]\{2\}/%25&/g' | $(TR) -d ' \n' | $(TR) 'abcdef' 'ABCDEF')))
+# This singly‐encodes u·r·i characters and doubly‐encodes other characters, then calls `perdec´ to decode back to a single encoding.
+# The encoding assumes the input is a “u·r·i component”; e·g that the resulting string should only contain `pchar´ (but can contain any `sub-delim´).
+#
+# It is assumed that the given strings do not contain newlines.
+#
+# ☡ This variable creates a subshell every time it is computed.
+override perenc = $(shell $(PRINTF) '%s\n' $(foreach unencoded,$1,$(call quote,$(unencoded))) | $(OD) -t x1 | $(SED) 's/^[0123456789]*//;s/0[Aa]/%&/g;s/2[146789ABCDEabcde]/%&/g;s/3[0123456789AaBbDd]/%&/g;s/40/%&/g;s/[46][123456789ABCDEFabcdef]/%&/g;s/[57][0123456789Aa]/%&/g;s/5[Ff]/%&/g;s/7[Ee]/%&/g;s/[ ][0123456789ABCDEFabcdef]\{2\}/%25&/g' | $(TR) -d ' \n' | $(TR) 'abcdef' 'ABCDEF' | $(perdeccmd))
# (callable) Percent‐encode each component in the given paths.
-override pathenc = $(foreach path,$1,$(subst $(space),/,$(call perenc,$(subst /, ,$(path)))))
+#
+# ☡ This variable creates a subshell every time it is computed.
+override pathenc = $(subst %2F,/,$(call perenc,$1))
+
+# (callable) Create a unique name for the given file, based on its absolute path.
+#
+# ☡ This variable creates a subshell every time it is computed.
+namehash = $(shell $(PRINTF) '%s' $(call quote,$(abspath $1)) | $(CKSUM) | $(SED) 's/ .*//' | $(XARGS) -E '' $(PRINTF) '%X')-$(notdir $1)
-# (overridable) Collect all of the applicable includes from the
-# includes directory.
-sourceincludes := $(shell $(FIND) $(FINDOPTS) $(INCLUDEDIR) -type f '(' $(FINDRULES) ')')
+# (overridable) Collect all of the applicable includes from the includes directory.
+sourceincludes := $(if $(and $(INCLUDEDIR),$(wildcard $(INCLUDEDIR))),$(patsubst ./%,%,$(shell $(FIND) $(foreach dir,$(INCLUDEDIR),$(call quote,$(dir))) '(' $(FINDINCLUDERULES) ')' -a -type f -a -print)),)
-# (overridable) Collect all of the applicable source files from the
-# source directory, removing any which are also includes.
-sourcefiles := $(filter-out $(sourceincludes),$(shell $(FIND) $(FINDOPTS) $(SRCDIR) -type f '(' $(FINDRULES) ')'))
+# (overridable) Collect all of the applicable source files from the source directory, removing any which are also includes.
+sourcefiles := $(if $(and $(SRCDIR),$(wildcard $(SRCDIR))),$(filter-out $(sourceincludes),$(patsubst ./%,%,$(shell $(FIND) $(foreach dir,$(SRCDIR),$(call quote,$(dir))) '(' $(FINDRULES) ')' -a -type f -a -print))))
# Figure out the file type of each source file and source include.
ifneq ($(wildcard $(BUILDDIR)/magic.mgc),)
-override types := $(shell $(SED) 's/^ *//;s/ *$$//;s/ {2,}/ /g' <<< $(call quote,$(sourcefiles) $(sourceincludes)) | $(TR) ' ' '\n' | $(FILE) -m $(call quote,$(BUILDDIR)/magic.mgc) --mime-type --separator ':' --files-from - | $(SED) 's/: */:/g')
+override types := $(shell $(PRINTF) '%s\n' $(call quote,$(sourcefiles) $(sourceincludes)) | $(SED) 's/^ *//;s/ *$$//;s/ {2,}/ /g' | $(TR) ' ' '\n' | $(FILE) -m $(call quote,$(BUILDDIR)/magic.mgc) --mime-type --separator '|' --files-from - | $(SED) 's/| */|/g')
endif
# Get the list of supported plaintext file types from the parser.
ifneq ($(wildcard $(BUILDDIR)/parser.xslt),)
-override plaintexttypes := $(filter-out $(XMLTYPES),$(shell $(XSLTPROC) $(call quote,$(THISDIR)/lib/parser2types.xslt) $(call quote,$(BUILDDIR)/parser.xslt)))
+override plaintexttypes := $(filter-out $(XMLTYPES),$(shell $(XMLLINT) --noent --nonet --xpath '/*/*[@name="书社:parsers"]//*[namespace-uri()="http://www.w3.org/1999/xhtml" and local-name()="dd"]/text()' $(call quote,$(BUILDDIR)/parser.xslt)))
endif
-# (callable) Get all of the files (source and includes) which have the
-# given types.
-override filesoftype = $(foreach type,$1,$(patsubst %:$(type),%,$(filter %:$(type),$(types))))
+# (callable) Get all of the files (source and includes) which have the provided types.
+#
+# If a provided type begins with a `+´, it is analysed as a suffix, and all matching types will be used.
+override filesoftype = $(foreach typeorsuffix,$1,$(foreach type,$(if $(filter +%,$(typeorsuffix)),$(sort $(foreach suffixedtype,$(filter %$(typeorsuffix),$(types)),$(lastword $(subst |, ,$(suffixedtype))))),$(typeorsuffix)),$(patsubst %|$(type),%,$(filter %|$(type),$(types)))))
# Build up collections of various file types.
override xmlfiles := $(call filesoftype,$(XMLTYPES))
override assetfiles := $(filter-out $(xmlfiles) $(plaintextfiles),$(sourcefiles) $(sourceincludes))
# (callable) Get the types of the given files.
-override typeoffile = $(patsubst $(foreach file,$1,$(file):%),%,$(filter $(foreach file,$1,$(file):%),$(types)))
+override typeoffile = $(foreach file,$1,$(or $(patsubst $(file)|%,%,$(filter $(file)|%,$(types))),application/octet-stream))
+
+# Pair each source magic file with its location in the build directory.
+override magicpair := $(foreach magicfile,$(MAGIC),$(magicfile)|$(BUILDDIR)/magic/$(call namehash,$(magicfile)))
+
+# (callable) Get the source file for the given magic files.
+override magicsource = $(foreach magicpath,$1,$(patsubst %|$(magicpath),%,$(firstword $(filter %|$(magicpath),$(magicpair)))))
-# (callable) Get the identifier for the given transform.
-override id = $(or $(shell $(XMLLINT) --xpath '/*/*[local-name()="id" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"]/text()[1]' $1),example:$(call pathenc,$(basename $(notdir $1))))
+# (callable) Get the build file for the given magic files.
+override magicfile = $(foreach file,$1,$(patsubst $(file)|%,%,$(filter $(file)|%,$(magicpair))))
# (callable) Get the local path for the given source file.
-override sourcepath = $(firstword $(foreach directory,$(SRCDIR),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))
+override sourcepath = $(or $(firstword $(foreach directory,$(SRCDIR),$(if $(filter .,$(directory)),$(wildcard $1),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))),$(error Unable to get local path for source file `$1´))
# (callable) Get the local path for the given include.
-override includepath = $(firstword $(foreach directory,$(INCLUDEDIR),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))
+override includepath = $(or $(firstword $(foreach directory,$(INCLUDEDIR),$(if $(filter .,$(directory)),$(wildcard $1),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))),$(error Unable to get local path for include file `$1´))
# (callable) Get base64 data u·r·i’s for the given files.
-override datauri = $(foreach file,$1,data:$(call typeoffile,$(file));base64,$(shell $(UUENCODE) -m -r $(call quote,$(file)) _ | tr -d ' \n'))
+#
+# ☡ This variable creates a subshell every time it is computed.
+override datauri = $(foreach file,$1,data:$(call typeoffile,$(file));base64,$(shell $(UUENCODE) -m $(call quote,$(file)) _ | $(SED) '2,$$!d;$$d' | $(TR) -d ' \n'))
# Pair each source file and include with its local u·r·i.
-override sourcelocalpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(if $(filter $(file),$(sourceincludes)),$(file):about:shushe?include=$(call pathenc,$(call includepath,$(file))),$(file):about:shushe?source=$(call pathenc,$(call sourcepath,$(file)))))
+override sourcelocalpair := $(foreach file,$(sourcefiles) $(sourceincludes),$(file)|about:shushe?$(if $(filter $(file),$(sourceincludes)),include=$(call pathenc,$(call includepath,$(file))),source=$(call pathenc,$(call sourcepath,$(file)))))
# (callable) Get local uris for the given files.
-override localuri = $(foreach file,$1,$(patsubst $(file):%,%,$(filter $(file):%,$(sourcelocalpair))))
+override localuri = $(foreach file,$1,$(patsubst $(file)|%,%,$(filter $(file)|%,$(sourcelocalpair))))
# (callable) Get the source files for the given local uris.
-override sourcefile = $(foreach local,$1,$(patsubst %:$(local),%,$(filter %:$(local),$(sourcelocalpair))))
+override sourcefile = $(foreach local,$1,$(patsubst %|$(local),%,$(filter %|$(local),$(sourcelocalpair))))
-# Adds a requirement on `$(BUILDDIR)/.update-types´ if the file is
-# present.
+# Resolves to the `FORCE´ target if `$(BUILDDIR)/.update-types´ is present.
#
-# This file is created after a reload due to type changes, and is
-# removed after. Requiring it ensures that file classifications are
-# up‐to‐date immediately after the reload.
-override typeupdates := $(wildcard $(BUILDDIR)/.update-types)
+# This file is created before a reload due to type changes, and is removed after.
+# This ensures that file classifications are up·to·date immediately after the reload.
+override typeupdates := $(and $(wildcard $(BUILDDIR)/.update-types),FORCE)
+
+# Pair each source file and include with its metadata location.
+override sourcemetadatapair := $(foreach file,$(sourcefiles) $(sourceincludes),$(file)|$(BUILDDIR)/$(if $(filter $(file),$(sourceincludes)),includes.metadata/$(call includepath,$(file)),sources.metadata/$(call sourcepath,$(file))))
+
+# (callable) Get the location of the transformed X·M·L files for the given source files.
+override metadata = $(foreach file,$1,$(patsubst $(file)|%,%,$(filter $(file)|%,$(sourcemetadatapair))))
-# (callable) Get the location of the transformed X·M·L files for the
-# given source files.
-override parsed = $(foreach file,$1,$(if $(filter $(file),$(sourceincludes)),$(BUILDDIR)/includes/$(call includepath,$(file)),$(BUILDDIR)/sources/$(call sourcepath,$(file))))
+# (callable) Get the source files for the given parsed file.
+override datadata = $(foreach file,$1,$(patsubst %|$(file),%,$(filter %|$(file),$(sourcemetadatapair))))
# Pair each source file and include with its parsed location.
-override sourceparsedpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(file):$(call parsed,$(file)))
+override sourceparsedpair := $(foreach file,$(sourcefiles) $(sourceincludes),$(file)|$(BUILDDIR)/$(if $(filter $(file),$(sourceincludes)),includes/$(call includepath,$(file)),sources/$(call sourcepath,$(file))))
+
+# (callable) Get the location of the transformed X·M·L files for the given source files.
+override parsed = $(foreach file,$1,$(patsubst $(file)|%,%,$(filter $(file)|%,$(sourceparsedpair))))
# (callable) Get the source files for the given parsed file.
-override unparsed = $(foreach file,$1,$(patsubst %:$(file),%,$(filter %:$(file),$(sourceparsedpair))))
+override unparsed = $(foreach file,$1,$(patsubst %|$(file),%,$(filter %|$(file),$(sourceparsedpair))))
+
+# Pair each build directory, parser, transform, source file, or parsed file with its file u·r·i.
+override fileuripairs := $(join $(patsubst %,%|,$(BUILDDIR) $(PARSERS) $(TRANSFORMS) $(sourcefiles) $(sourceincludes) $(call parsed,$(sourcefiles) $(sourceincludes))),$(call pathenc,$(foreach uriable,$(BUILDDIR) $(PARSERS) $(TRANSFORMS) $(sourcefiles) $(sourceincludes) $(call parsed,$(sourcefiles) $(sourceincludes)),file://$(abspath $(uriable)))))
+
+# (callable) Get the file u·r·is for the given parsers, transforms, source file or parsed files.
+override fileuri = $(foreach file,$1,$(or $(patsubst $(file)|%,%,$(filter $(file)|%,$(fileuripairs))),$(error Unable to get file u·r·i for `$(file)´)))
ifneq ($(wildcard $(BUILDDIR)/dependencies),)
# Pair each file with a list of dependencies for it.
-override dependenciesforfile := $(foreach file,$(sourcefiles),$(file):$(subst $(space),:,$(shell $(CAT) $(call quote,$(BUILDDIR)/dependencies) | $(SED) $(call quote,/^$(call sedesc,$(call localuri,$(file)))$$/$(comma)/^[^ ]/!d;/^ /!d;s/^ //))))
+override dependenciesforfile := $(foreach file,$(filter-out $(assetfiles),$(sourcefiles) $(sourceincludes)),$(file)|$(subst $(space),|,$(shell $(SED) $(call quote,/^$(call sedesc,$(call localuri,$(file)))$$/$(comma)/^[^ ]/!d;/^ /!d;s/^ //) <$(call quote,$(BUILDDIR)/dependencies))))
-# (callable) Get the list of dependency leiris for the given source
-# files.
+# (callable) Get the list of dependency leiris for the given source files.
#
# Recursive dependencies are marked with a leading `-´.
-override dependencyuris = $(foreach file,$1,$(subst :, ,$(patsubst $(file):%,%,$(filter $(file):%,$(dependenciesforfile)))))
+override dependencyuris = $(foreach file,$1,$(subst |, ,$(patsubst $(file)|%,%,$(filter $(file)|%,$(dependenciesforfile)))))
-# (callable) Get the list of recursive dependencies for the given
-# source files.
+# (callable) Get the list of recursive dependencies for the given source files.
+#
+# If the file cannot have dependencies (e·g is an asset file), the resulting value will be the empty string.
override recursives = $(foreach uri,$(filter -%,$(call dependencyuris,$1)),$(call sourcefile,$(patsubst -%,%,$(uri))))
-# (callable) Get the list of (nonrecursive) dependencies for the given
-# source files.
+# (callable) Get the list of (nonrecursive) dependencies for the given source files.
+#
+# If the file cannot have dependencies (e·g is an asset file), the resulting value will be the empty string.
override dependencies = $(foreach uri,$(filter-out -%,$(call dependencyuris,$1)),$(call sourcefile,$(uri)))
endif
# This is all of the non·asset, nonrecursive files.
override compilablefiles := $(filter-out $(assetfiles) $(recursivefiles),$(sourcefiles))
-# (callable) Get the compiled locations for the given source files.
-override compiled = $(foreach file,$1,$(BUILDDIR)/public/$(call sourcepath,$(file)))
+# Collect all files which can be installed.
+#
+# This is all of the comilable files and all asset sources.
+override installablefiles := $(compilablefiles) $(filter $(assetfiles),$(sourcefiles))
-# Pair each source file and include with its compiled location.
-override sourcecompiledpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(file):$(call compiled,$(file)))
+ifneq ($(wildcard $(BUILDDIR)/destinations),)
+# Get the output of the destination transform.
+override destinations := $(shell $(CAT) $(BUILDDIR)/destinations)
-# (callable) Get the source files for the given compiled file.
-override uncompiled = $(foreach file,$1,$(patsubst %:$(file),%,$(filter %:$(file),$(sourcecompiledpair))))
+# Pair source files and their destinations.
+override sourcedestinationpair := $(foreach destination,$(destinations),$(call sourcefile,$(firstword $(subst |, ,$(destination))))|$(subst $(space),|,$(wordlist 2,$(words $(subst |, ,$(destination))),$(subst |, ,$(destination)))))
+endif
+
+# (callable) Get the destination for the given source files, or return `.NOTDEF/$1´.
+#
+# The fallback here is because destinations are used to generate targets and thus must always be non·empty and should be unique, even when they haven’t been generated yet.
+override destination = $(foreach file,$1,$(or $(patsubst $(file)|%,%,$(filter $(file)|%,$(sourcedestinationpair))),.NOTDEF/$1))
+
+# Pair each source file with its compiled location.
+override sourcecompiledpair := $(foreach file,$(sourcefiles),$(file)|$(BUILDDIR)/results/$(call destination,$(file)))
+
+# (callable) Get the location of the transformed X·M·L files for the given source files.
+override compiled = $(foreach file,$1,$(patsubst $(file)|%,%,$(filter $(file)|%,$(sourcecompiledpair))))
+
+# (callable) Get the location of the source files for the given compiled file.
+override uncompiled = $(foreach file,$1,$(patsubst %|$(file),%,$(filter %|$(file),$(sourcecompiledpair))))
+
+# (callable) Get the location of the final built files for the given source files.
+override built = $(foreach file,$1,$(patsubst $(BUILDDIR)/results/%,$(BUILDDIR)/public/%,$(call compiled,$(file))))
+
+# (callable) Get the location of the source files for the given built files.
+override unbuilt = $(foreach file,$1,$(call uncompiled,$(patsubst $(BUILDDIR)/public/%,$(BUILDDIR)/results/%,$(file))))
# (callable) Get the installed locations for the given source files.
-override installed = $(foreach file,$1,$(DESTDIR)/$(call sourcepath,$(file)))
+override installed = $(foreach file,$1,$(DESTDIR)/$(call destination,$(file)))
# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
-# (callable) Check to see if the given directory exists and
-# create it if not.
-override ensuredirectory = if $(TEST) ! -d $(call quote,$1); then $(MKDIR) -p $(call quote,$1); fi
+# (callable) Get the identifier for the given parser or transform.
+override id = $(XMLLINT) --noent --nonet --xpath '/*/*[local-name()="id" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"]/text()[1]' $(call quote,$1) 2>>/dev/null || $(PRINTF) '%s\n' $(call quote,about:shushe?$(or $2,unknown)=$(call pathenc,$(basename $(notdir $1))))
-# (callable) Sanitize and wrap the provided plaintext file in
-# X·M·L, printing to `stdout´.
-override wrapplaintext = $(PRINTF) '%s\n' "$$($(PRINTF) '%b' '<?xml version=\042\061.0\042?>\n<script xmlns=\042http://www.w3.org/1999/xhtml\042 type=\042$(call typeoffile,$1)\042><![CDATA['; $(CAT) $(call quote,$1) | $(TR) '\000\013\014' '\032\011\012' | $(SED) $$($(PRINTF) '%s%b' 's/]]>/]]]]><!\[CDATA\[>/g;s/\xEF\xBF\xBE/�/g;s/\xEF\xBF\xBF/�/g;$$!s/\r$$//g;s/\r/\n/g;$$!s/\xC2\x85$$//g;s/\xC2\x85/\n/g;s/\xE2\x80\xA8/\n/g;' 's/[\0001-\0010]/�/g;s/[\0016-\0037]/�/g'); $(PRINTF) '%s' ']]></script>')"
+# (callable) Sanitize and wrap the provided plaintext file in X·M·L, printing to `stdout´.
+override wrapplaintext = { $(PRINTF) '%s\n%s' '<?xml version="1.0"?>' '<script xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$1)"><![CDATA['; $(TR) '\000\013\014' '\032\011\012' <$(call quote,$1) | $(SED) "$$($(PRINTF) '%b' 's/]]>/]]]]><!\\[CDATA\\[>/g\ns/\0357\0277\0276/�/g\ns/\0357\0277\0277/�/g\n$$!s/\\r$$//g\ns/\\r/\\n/g\n$$!s/\0302\0205$$//g\ns/\0302\0205/\\n/g\ns/\0342\0200\0250/\\n/g\ns/[\0001\0002\0003\0004\0005\0006\0007\0010]/�/g\ns/[\0016\0017\0020\0021\0022\0023\0024\0025\0026\0027\0031\0032\0033\0034\0035\0036\0037]/�/g')"; $(PRINTF) '%s\n' ']]></script>'; }
-# ─ ¶ Phony Targets ───────────────────────────────────────────────────
+# (callable) Check if the provided X·M·L file is X·M·L 1.1, and if so, coerce to X·M·L 1.0 as best as possible, printing the result (or the original file contents) to `stdout´.
+#
+# The X·M·L declaration will be dropped and character escapes for C0 control codes will be replaced with a literal `U+0091 PRIVATE USE ONE´, which is invalid in X·M·L 1.1, but valid X·M·L 1.0 (making the replacement obvious).
+#
+# This isn’t a perfect substitution (it makes some assumptions about the format of the underlying X·M·L), but it should be workable for most sensible, welformed files.
+override serializexml = $(SED) "$$($(PRINTF) '%b' '/<?xml[ \t]\\{1,\\}version=[\0042\0047]1.1/,$${ s/<?xml[^>]*?>/<!--<?xml version=\00421.1\0042?>-->/\n s/&\0043x0*[12345678BCEFbcef];/\0302\0221/g\n s/&\0043x0*1[0123456789ABCDEFabcdef];/\0302\0221/g\n s/&\00430*[12345678];/\0302\0221/g\n s/&\00430*1[12456789];/\0302\0221/g\n s/&\00430*2[0123456789];/\0302\0221/g\n s/&\00430*3[01];/\0302\0221/g\n}')" <$(call quote,$1) | $(SED) "$$($(PRINTF) '%b' ':a\n/^\\n*$$/{ $$d\n N\n ba\n}')"
-# Provide help.
-help:
- $(silent)$(PRINTF) '%b' '$(subst $(newline),\n,$(makefileinfo))'
+# (callable) Wraps the provided shell script in a conditional which checks whether a make restart caused by `$(BUILDDIR)/.update-types´ is imminent (i·e, it was created during the course of this run) and only executes the script if it is not.
+override unlesstypeswillupdate = $(if $(call not,$(typeupdates)),if $(TEST) ! -e $(call quote,$(BUILDDIR)/.update-types); then ,)$1$(and $(call not,$(typeupdates)),; fi)
+
+# ─ ¶ Phony Targets ───────────────────────────────────────────────────
# Compile all files, or error if any are recursive.
-all: $(call compiled,$(recursivefiles) $(compilablefiles) $(filter $(sourcefiles),$(assetfiles))) ;
+all : $(call built,$(recursivefiles) $(installablefiles)) ;
# Destroy buildfiles.
-clean:
- $(silent)$(RM) -rf $(BUILDDIR)/
+clean :
+ $(if $(BUILDDIR),$(silent)$(RM) -f -R $(call quote,$(BUILDDIR)/),)
-# Destroy buildfiles and the install directory.
-gone:
- $(silent)$(RM) -rf $(BUILDDIR)/ $(call compiled,$(recursivefiles) $(compilablefiles))
+# Destroy build directory and installed files.
+gone : clean uninstall ;
-# Install the compiled files into `DESTDIR´.
-install: $(call installed,$(recursivefiles) $(compilablefiles) $(filter $(sourcefiles),$(assetfiles))) ;
+# Provide help.
+help :
+ @$(PRINTF) '%b' '$(subst $(newline),\n,$(makefileinfo))'
+
+# Install the compiled files into `DESTDIR´, or error if any are recursive.
+install : $(call installed,$(recursivefiles) $(installablefiles)) ;
# List all source files and includes and their computed types.
-list:
- $(silent)$(PRINTF) '%b' $(call quote,$(foreach file,$(sort $(sourcefiles)) $(sort $(sourceincludes)),\0033[1m$(file)\0033[22m:$(call typeoffile,$(file)):[\0033[3m$(if $(filter $(file),$(xmlfiles)),xml,$(if $(filter $(file),$(plaintextfiles)),text,asset))$(if $(filter $(file),$(sourceincludes)),:include,)\0033[23m]$(if $(call dependencies,$(file))$(call recursives,$(file)), $(strip $(foreach recursive,$(call recursives,$(file)),\0033[93;41m•:Recursive:Dependency:\0033[39;49m:$(recursive)) $(foreach dependency,$(call dependencies,$(file)),\0033[2m•:Dependency:\0033[22m:$(dependency)))) )) | $(TR) ' :' '\n '
+list :
+ @$(PRINTF) '%b' $(call quote,$(foreach file,$(sort $(sourcefiles)) $(sort $(sourceincludes)),\0033[1m$(file)\0033[22m|$(call typeoffile,$(file))|[\0033[3m$(if $(filter $(file),$(xmlfiles)),xml,$(if $(filter $(file),$(plaintextfiles)),text,asset))$(if $(filter $(file),$(sourceincludes)),|include,)\0033[23m]$(if $(call dependencies,$(file))$(call recursives,$(file)), $(strip $(foreach recursive,$(call recursives,$(file)),\0033[93;41m•|Recursive|Dependency|\0033[39;49m|$(recursive)) $(foreach dependency,$(call dependencies,$(file)),\0033[2m•|Dependency|\0033[22m|$(dependency))))$(if $(filter $(file),$(sourcefiles)), →|<\0033[4m/$(call destination,$(file))\0033[24m>,) )) | $(TR) ' |' '\n '
+
+# Lists out the destinations of all resulting files (relative to `DESTDIR´).
+listout :
+ @$(PRINTF) '%s\n' $(call quote,$(foreach file,$(sort $(sourcefiles)),$(call destination,$(file))))
-# Raise an error when attempting to build any files with recursive
-# dependencies.
-$(call compiled,$(recursivefiles)): $(BUILDDIR)/public/%:
- @$(PRINTF) '%b\n' $(call quote,\0033[93;41mError:\0033[39;49m `$*´ has recursive dependencies:\n$(subst :, ,$(subst $(space),$(newline),$(foreach recursive,$(call recursives,$(SRCDIR)/$*),•:$(patsubst $(SRCDIR)/%,%,$(recursive)))))) && false
+# Destroy installed files.
+uninstall :
+ $(foreach file,$(installablefiles),$(if $(wildcard $(call installed,$(file))),$(silent)$(PRINTF) '%s\n' $(call quote,Removing </$(patsubst $(DESTDIR)/%,%,$(call installed,$(file)))>…)$(newline)$(silent)$(RM) -f $(call quote,$(call installed,$(file)))$(newline),))
+
+# Raise an error when attempting to build any files with recursive dependencies.
+$(call built,$(recursivefiles)) :
+ @$(PRINTF) '%b\n' $(call quote,\0033[93;41mError:\0033[39;49m `$(call unbuilt,$@)´ has recursive dependencies:\n$(subst |, ,$(subst $(space),$(newline),$(foreach recursive,$(call recursives,$(call unbuilt,$@)),•|$(recursive))))) >&2 && exit 1
+
+# Add as a prerequisite to treat the target as tho it were phony.
+FORCE : ;
# ─ ¶ Special Targets ─────────────────────────────────────────────────
-# Perform secondary expansion; this enables pattern rules to determine
-# their prerequisites based on the matched pattern.
-.SECONDEXPANSION: ;
+# Perform secondary expansion; this enables pattern rules to determine their prerequisites based on the matched pattern.
+.SECONDEXPANSION : ;
# Don’t use any implicit rules.
-.SUFFIXES: ;
+.SUFFIXES : ;
-# Phony rules; always consider these out‐of‐date.
-.PHONY: all default clean gone info install list $(call compiled,$(recursivefiles));
+# Don’t delete these files even if Make is stopped in the process of rebuilding them.
+.PRECIOUS : $(THISDIR)/GNUmakefile ;
-ifneq ($(wildcard $(BUILDDIR)/.update-types)$(wildcard $(BUILDDIR)/dependencies),)
-# Reload this make·file if the dependency graph has changed.
-#
-# This graph is a dependency for some of the variables that this
-# make·file uses, so it’s important to ensure that they are actually
-# up‐to‐date prior to executing any later rules.
-#
-# This recipe only exists after types have been updated or when the
-# dependency graph already exists.
-$(THISDIR)/GNUmakefile:: $(BUILDDIR)/dependencies
- $(silent)$(TOUCH) $(THISDIR)/GNUmakefile
- $(silent)$(RM) -f $(BUILDDIR)/.update-types
- @$(PRINTF) '%b\n' '\0033[1mDependency graph updated. Restarting…\0033[22m'
-endif
+# Phony rules; always consider these out·of·date.
+.PHONY : FORCE all clean gone help install list listout uninstall $(call built,$(recursivefiles)) ;
-ifeq ($(wildcard $(BUILDDIR)/.update-types),)
-# Reload this make·file if any of the magic files or parsers have
-# changed.
+ifeq ($(notbuilding),)
+# Reload this make·file if the magic file, parser, dependencies, or destinations have changed.
#
-# These are used to classify source files, so if they have changed then
-# the make·file must be reloaded.
-#
-# This recipe sleeps for one second to ensure that files built after
-# the restart have a more current time·stamp.
-$(THISDIR)/GNUmakefile:: $(BUILDDIR)/magic.mgc $(BUILDDIR)/parser.xslt $(THISDIR)/lib/parser2types.xslt
+# If the magic file or parser changed, then another restart will be required, as the dependencies and destinations will need to be regenerated.
+$(THISDIR)/GNUmakefile : $(BUILDDIR)/magic.mgc $(BUILDDIR)/parser.xslt $(BUILDDIR)/dependencies $(BUILDDIR)/destinations
$(silent)$(TOUCH) $(THISDIR)/GNUmakefile
- $(silent)$(RM) -f $(call quote,$(BUILDDIR)/dependencies)
- @$(PRINTF) '%b\n' '\0033[1mMagic file or parsers have updated. Restarting…\0033[22m'
- $(silent)$(SLEEP) 1
- $(silent)$(TOUCH) $(call quote,$(BUILDDIR)/.update-types)
+ $(if $(filter $(BUILDDIR)/magic.mgc $(BUILDDIR)/parser.xslt,$?),$(call inform,$(PRINTF) '%b\n' '\0033[1mMagic file or parsers have updated. Restarting…\0033[22m' >&2)$(newline)$(silent)$(SLEEP) 1,$(if $(typeupdates),$(silent)$(RM) $(call quote,$(BUILDDIR)/.update-types)$(newline),)$(call inform,$(PRINTF) '%b\n' '\0033[1mDependency graph and output destinations updated. Restarting…\0033[22m' >&2))
endif
# ─ ¶ Build Targets ───────────────────────────────────────────────────
+# Create symbolic links from the build directory’s store of magic files to their corresponding sources.
+$(call magicfile,$(MAGIC)) : $(BUILDDIR)/magic/% : $$(call magicsource,$$@)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(LN) -sf $(call quote,$(realpath $<)) $(call quote,$@)
+
# Generate the compiled magic file from its sources.
#
# It must be updated if any of the files in the magic directory change.
-# It ⁜also⁜ should be updated if any of the files in the magic
-# directory are deleted, but this isn’t tracked presently.
-$(BUILDDIR)/magic.mgc: $(wildcard $(MAGICDIR)/*)
- @$(ECHO) "Compiling new magic…"
+$(BUILDDIR)/magic.mgc : $(call diffprereqs,magic,$(sort $(call magicfile,$(MAGIC))))
+ $(foreach outdated,$(filter-out $^,$(wildcard $(BUILDDIR)/magic/*)),$(silent)$(RM) $(call quote,$(outdated))$(newline))
+ $(call inform,$(PRINTF) '%s\n' 'Compiling new magic…' >&2)
$(silent)$(call ensuredirectory,$(dir $@))
- $(silent)cd $(call quote,$(BUILDDIR)) && $(FILE) -C -m $(call quote,$(realpath $(MAGICDIR)))
+ $(silent)$(CD) $(call quote,$(BUILDDIR)) && $(FILE) -C -m $(call quote,$(realpath $(BUILDDIR)/magic))
+ $(silent)$(TOUCH) $(call quote,$(BUILDDIR)/.update-types)
# Generate the main parser.
-$(BUILDDIR)/parser.catalog: $(PARSERS)
- @$(ECHO) "Generating catalog of parsers…"
+$(BUILDDIR)/parser.catalog : $(call diffprereqs,parsers,$(sort $(PARSERS)))
+ $(call inform,$(PRINTF) '%s\n' 'Generating catalog of parsers…' >&2)
$(silent)$(XMLCATALOG) --create --noout $(call quote,$@)
- $(foreach parser,$(PARSERS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(call id,$(parser))) $(call quote,$(call pathenc,../$(parser))) --noout $(call quote,$@)$(newline))
-$(BUILDDIR)/parser.xslt: $(BUILDDIR)/parser.catalog $(THISDIR)/lib/catalog2parser.xslt
- @$(ECHO) "Generating main parser…"
- $(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/catalog2parser.xslt) $(call quote,$<)
+ $(foreach parser,$(PARSERS),$(silent){ $(call id,$(parser)); $(PRINTF) '%s\n' $(call quote,$(call fileuri,$(parser))) '--noout' $(call quote,$@); } | $(xargsmultiquote) | $(XARGS) -E '' $(XMLCATALOG) --add uri$(newline))
+$(BUILDDIR)/parser.xslt : $(BUILDDIR)/parser.catalog $(THISDIR)/lib/catalog2parser.xslt
+ $(call inform,$(PRINTF) '%s\n' 'Generating main parser…' >&2)
+ $(silent)$(XSLTPROC) --nonet --novalid --nomkdir --nowrite $(call quote,$(THISDIR)/lib/catalog2parser.xslt) $(call quote,$<) >|$(call quote,$@)
+ $(silent)$(TOUCH) $(call quote,$(BUILDDIR)/.update-types)
-# Parse the files.
+# Generate R·D·F metadata for files.
#
-# Even plain X·M·L files are parsed, because they may contain X·H·T·M·L
-# `<script>´ elements which contain other kinds of data. Asset files
-# are turned into H·T·M·L embeds pointing to `data:´ U·R·I’s.
-$(call parsed,$(sourcefiles) $(sourceincludes)): %: $$(call unparsed,$$@) $(typeupdates)
- @$(PRINTF) '%s\n' $(call quote,Processing `$<´…)
- $(silent)$(call ensuredirectory,$(dir $@))
- $(silent)$(if $(filter $<,$(assetfiles)),$(PRINTF) '%s\n' $(call quote,<object xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$<)" data="$(call datauri,$<)"/>) > $(call quote,$@),$(if $(filter $<,$(plaintextfiles)),$(call wrapplaintext,$<),$(CAT) $(call quote,$<)) | $(XSLTPROC) -o $(call quote,$@) $(call quote,$(BUILDDIR)/parser.xslt) -)
+# If the types have been updated but `typeupdates´ is not active, this recipe is skipped because a restart is forthcoming.
+$(call metadata,$(sourcefiles) $(sourceincludes)) : % : $$(call datadata,$$@) $(THISDIR)/.metadata-format-changed-since $(typeupdates)
+ $(call inform,$(call unlesstypeswillupdate,$(PRINTF) '%s\n' $(call quote,Generating metadata for `$<´…) >&2))
+ $(silent)$(call unlesstypeswillupdate,$(call ensuredirectory,$(dir $@)); { if $(TEST) ! -f $(call quote,$(BUILDDIR)/.mtime); then $(PRINTF) '%b' '\n' >|$(call quote,$(BUILDDIR)/.mtime); fi; $(TOUCH) -r $(call quote,$<) $(call quote,$(BUILDDIR)/.mtime); $(DIFF) -u $(call quote,$(BUILDDIR)/.mtime) /dev/null | $(SED) '1!d;s/.* \([^ ]*\) \([^ ]*\).*$$/\1T\2Z/'; $(CKSUM) $(call quote,$<) | $(SED) 's/[ ].*//'; } | $(xargsmultiquote) | $(XARGS) -E '' $(PRINTF) '<?xml version="1.0"?><书社vocab:$(if $(filter $<,$(sourceincludes)),IncludeFile,SourceFile) xmlns:nie="http://www.semanticdesktop.org/ontologies/2007/01/19/nie#" xmlns:nfo="http://www.semanticdesktop.org/ontologies/2007/03/22/nfo#" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:书社vocab="urn:fdc:ladys.computer:20231231:Shu1She4:vocab:" rdf:about="%s" 书社vocab:path="%s" nfo:fileUrl="%s"><nie:interpretedAs>$(if $(filter $<,$(assetfiles)),<nfo:InformationElement nie:mimeType="%s"/>,<nfo:PlainTextDocument nie:mimeType="%s"/>)</nie:interpretedAs><书社vocab:hasParsedFile nfo:fileUrl="%s"/><nfo:fileLastModified rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">%s</nfo:fileLastModified><nfo:hasHash nfo:hashAlgorithm="CRC32" nfo:hashValue="%s"/></书社vocab:$(if $(filter $<,$(sourceincludes)),IncludeFile,SourceFile)>' $(call quote,$(call attresc,$(call localuri,$<))) $(call quote,$(call attresc,$(if $(filter $<,$(sourceincludes)),$(call includepath,$<),$(call sourcepath,$<)))) $(call quote,$(call attresc,$(call fileuri,$<))) $(call quote,$(call attresc,$(call typeoffile,$<))) $(call quote,$(call attresc,$(call fileuri,$(call parsed,$<)))) >|$(call quote,$@))
-# Generate a catalog of all parsed files, for use when processing
-# includes. This does not depend on actually transforming the files.
-$(BUILDDIR)/catalog: $(sourcefiles) $(sourceincludes) $(typeupdates)
- @$(ECHO) "Generating catalog of parsed files…"
- $(silent)$(XMLCATALOG) --create --noout $(call quote,$@)
- $(foreach source,$(sourcefiles) $(sourceincludes),$(silent)$(XMLCATALOG) --add uri $(call quote,$(call localuri,$(source))) $(call quote,$(call pathenc,$(patsubst $(BUILDDIR)/%,%,$(call parsed,$(source))))#$(if $(filter $(source),$(assetfiles)),asset,xml)) --noout $(call quote,$@)$(newline))
+# Parse the files.
+#
+# Even plain X·M·L files are parsed, because they may contain X·H·T·M·L `<script>´ elements which contain other kinds of data.
+# Asset files are turned into H·T·M·L embeds pointing to `data:´ U·R·I’s.
+#
+# If the types have been updated but `typeupdates´ is not active, this recipe is skipped because a restart is forthcoming.
+$(call parsed,$(sourcefiles) $(sourceincludes)) : % : $$(call unparsed,$$@) $(BUILDDIR)/parser.xslt $(PARSERLIBS) $(typeupdates)
+ $(call inform,$(call unlesstypeswillupdate,$(PRINTF) '%s\n' $(call quote,Processing `$<´…) >&2))
+ $(silent)$(call unlesstypeswillupdate,$(call ensuredirectory,$(dir $@)); $(if $(filter $<,$(assetfiles)),$(PRINTF) '%s\n' $(call quote,<?xml version="1.0"?><object xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$<)" data="$(call datauri,$<)"/>) >|$(call quote,$@),$(if $(filter $<,$(plaintextfiles)),$(call wrapplaintext,$<),$(call serializexml,$<)) | $(XSLTPROC) --nonet --novalid --nomkdir --nowrite --stringparam BUILDTIME $$($(DATE) -u '+%Y-%m-%dT%H:%M:%SZ') --stringparam IDENTIFIER $(call quote,$(call localuri,$<))$(if $(THISREV), --stringparam THISREV $(call quote,$(THISREV)),)$(if $(SRCREV), --stringparam SRCREV $(call quote,$(SRCREV)),) $(call quote,$(BUILDDIR)/parser.xslt) - >|$(call quote,$@)))
-# Build a list of dependencies for each parsed file.
-$(BUILDDIR)/dependencies: $(BUILDDIR)/catalog $(call parsed,$(plaintextfiles) $(xmlfiles)) $(THISDIR)/lib/catalog2dependencies.xslt
- @$(ECHO) "Identifying dependencies…"
- $(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/catalog2dependencies.xslt) $(call quote,$<)
+# Collect the metadata into a single file, and generate the dependencies and destinations files as side·effects.
+#
+# Doing this all in one step reduces the number of calls to `xsltproc´ required, but requires that it be called from the build directory (necessitating a subshell).
+#
+# If the types have been updated but `typeupdates´ is not active, this recipe is skipped because a restart is forthcoming.
+$(BUILDDIR)/dependencies $(BUILDDIR)/destinations $(BUILDDIR)/metadata : $(call diffprereqs,metadatas,$(call metadata,$(sort $(sourcefiles) $(sourceincludes)))) $(call parsed,$(filter-out $(assetfiles),$(sourcefiles) $(sourceincludes))) $(THISDIR)/lib/expandmetadata.xslt
+ $(call inform,$(call unlesstypeswillupdate,$(PRINTF) '%s\n' 'Compiling metadata…' >&2))
+ $(silent)$(call unlesstypeswillupdate,{ $(PRINTF) '<?xml version="1.0"?><rdf:RDF xmlns:nie="http://www.semanticdesktop.org/ontologies/2007/01/19/nie#" xmlns:nfo="http://www.semanticdesktop.org/ontologies/2007/03/22/nfo#" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:书社vocab="urn:fdc:ladys.computer:20231231:Shu1She4:vocab:"><书社vocab:BuildDirectory nfo:fileUrl="%s"/>' $(call quote,$(call attresc,$(call fileuri,$(BUILDDIR)))); {$(foreach meta,$(call metadata,$(sort $(sourcefiles) $(sourceincludes))), $(CAT) $(call quote,$(meta));) } | $(SED) 's/<?xml version="1.0"?>//g'; $(PRINTF) '%s\n' '</rdf:RDF>'; } | ( $(CD) $(call quote,$(BUILDDIR)); $(XSLTPROC) --nonet --novalid --nomkdir $(call quote,$(abspath $(THISDIR)/lib/expandmetadata.xslt)) - ) | $(XMLLINT) --nonet --nsclean - >|$(call quote,$(BUILDDIR)/metadata))
# Generate the main transform.
-$(BUILDDIR)/transform.catalog: $(TRANSFORMS)
- @$(ECHO) "Generating catalog of transforms…"
+$(BUILDDIR)/transform.catalog : $(call diffprereqs,transforms,$(sort $(TRANSFORMS)))
+ $(call inform,$(PRINTF) '%s\n' 'Generating catalog of transforms…' >&2)
$(silent)$(XMLCATALOG) --create --noout $(call quote,$@)
- $(foreach transform,$(TRANSFORMS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(call id,$(transform))) $(call quote,$(call pathenc,../$(transform))) --noout $(call quote,$@)$(newline))
-$(BUILDDIR)/transform.xslt: $(BUILDDIR)/transform.catalog $(THISDIR)/lib/catalog2transform.xslt
- @$(ECHO) "Generating main transform…"
- $(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/catalog2transform.xslt) $(call quote,$<)
+ $(foreach transform,$(TRANSFORMS),$(silent){ $(call id,$(transform)); $(PRINTF) '%s\n' $(call quote,$(call fileuri,$(transform))) '--noout' $(call quote,$@); } | $(xargsmultiquote) | $(XARGS) -E '' $(XMLCATALOG) --add uri$(newline))
+$(BUILDDIR)/transform.xslt : $(BUILDDIR)/transform.catalog $(BUILDDIR)/metadata $(THISDIR)/lib/literally.xslt $(THISDIR)/lib/catalog2transform.xslt
+ $(call inform,$(PRINTF) '%s\n' 'Generating main transform…' >&2)
+ $(silent)$(XSLTPROC) --nonet --novalid --nomkdir --nowrite --stringparam METADATA $(call quote,$(call fileuri,$(BUILDDIR))/metadata) $(call quote,$(THISDIR)/lib/catalog2transform.xslt) $(call quote,$<) >|$(call quote,$@)
+
+# Compile the result files using the dependencies as necessary.
+$(call compiled,$(compilablefiles)) : $(BUILDDIR)/results/% : $$(call parsed,$$(call uncompiled,$$@)) $$(call parsed,$$(call dependencies,$$(call uncompiled,$$@))) $(BUILDDIR)/transform.xslt $(TRANSFORMLIBS) $(BUILDDIR)/metadata
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Compiling </$*>…) >&2)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(XSLTPROC) --nonet --novalid --nomkdir --nowrite --stringparam METADATA 'metadata' --stringparam BUILDTIME $$($(DATE) -u '+%Y-%m-%dT%H:%M:%SZ') --stringparam IDENTIFIER $(call quote,$(call localuri,$(call uncompiled,$@)))$(if $(THISREV), --stringparam THISREV $(call quote,$(THISREV)),)$(if $(SRCREV), --stringparam SRCREV $(call quote,$(SRCREV)),) $(call quote,$(BUILDDIR)/transform.xslt) $(call quote,$<) >|$(call quote,$@)
-# Generate the output files using the dependencies as necessary.
-$(call compiled,$(compilablefiles)): $(BUILDDIR)/public/%: $$(call parsed,$$(call uncompiled,$$@)) $(BUILDDIR)/transform.xslt $$(call parsed,$$(call dependencies,$$(call uncompiled,$$@)))
+# Create the final files from the compiled results (or error in the case of recursive ones).
+$(call built,$(compilablefiles)) : $(BUILDDIR)/public/% : $(BUILDDIR)/results/%
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Building </$*>…) >&2)
$(silent)$(call ensuredirectory,$(dir $@))
- @$(PRINTF) '%s\n' $(call quote,Compiling </$*>…)
- $(silent)$(XSLTPROC) -o $(call quote,$@) --stringparam catalog 'catalog' --stringparam buildtime '$(shell TZ= $(DATE) '+%Y-%m-%dT%H:%M:%SZ')' --stringparam srctime '$(shell TZ= $(STAT) -f '%Sm' -t '%Y-%m-%dT%H:%M:%SZ' $(call quote,$(call uncompiled,$@)))' --stringparam path $(call quote,/$*) $(call quote,$(BUILDDIR)/transform.xslt) $(call quote,$<)
-$(call compiled,$(filter $(assetfiles),$(sourcefiles))): $(BUILDDIR)/public/%: $$(call uncompiled,$$@)
- @$(PRINTF) '%s\n' $(call quote,Compiling </$*>…)
+ $(silent)$(RM) -f -R $(call quote,$@)
+ $(silent)$(call processresultto,$<,$@,$*)
+$(call built,$(filter $(assetfiles),$(sourcefiles))) : $(BUILDDIR)/public/% : $$(call unbuilt,$$@)
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Building </$*>…) >&2)
$(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(RM) -f -R $(call quote,$@)
$(silent)$(CP) $(call quote,$<) $(call quote,$@)
# Install compiled files (or error in the case of recursive ones).
-$(call installed,$(filter $(assetfiles),$(sourcefiles)) $(recursivefiles) $(compilablefiles)): $(DESTDIR)/%: $(BUILDDIR)/public/%
- @$(PRINTF) '%s\n' $(call quote,Installing </$*>…)
+$(call installed,$(recursivefiles) $(installablefiles)) : $(DESTDIR)/% : $(BUILDDIR)/public/%
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Installing </$*>…) >&2)
$(silent)$(call ensuredirectory,$(dir $@))
- $(silent)$(CP) $(call quote,$<) $(call quote,$@)
+ $(silent)$(RM) -f -R $(call quote,$@)
+ $(silent)$(CP) -R $(call quote,$<) $(call quote,$@)
+
+# ━ § BEGIN ARCHIVE MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+else ifeq ($(MODE),urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive)
+
+# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
+
+# Get the list of files in the archive.
+ifneq ($(wildcard $(BUILDDIR)/index),)
+override archivefiles := $(patsubst ./extracted/%,%,$(shell $(CAT) $(call quote,$(BUILDDIR)/index)))
+endif
+
+# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
+
+# ─ ¶ Phony Targets ───────────────────────────────────────────────────
+
+# ─ ¶ Special Targets ─────────────────────────────────────────────────
+
+# Don’t use any implicit rules.
+.SUFFIXES : ;
+
+# Don’t delete these files even if Make is stopped in the process of rebuilding them.
+.PRECIOUS : $(THISDIR)/GNUmakefile ;
+
+# Reload this make·file if the archive components have changed.
+$(THISDIR)/GNUmakefile : $(BUILDDIR)/index
+ $(silent)$(TOUCH) $(THISDIR)/GNUmakefile
+ $(call inform,$(PRINTF) '%b\n' $(call quote,\0033[1mArchive components for </$(NAME)> updated. Restarting…\0033[22m) >&2)
+
+# ─ ¶ Build Targets ───────────────────────────────────────────────────
+
+# Build the extractor transform for extracting the contents of the archive source file.
+$(BUILDDIR)/extractor.xslt : $(SRC) $(THISDIR)/lib/archive2extractor.xslt
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(XSLTPROC) --nonet --novalid --nomkdir --nowrite $(call quote,$(THISDIR)/lib/archive2extractor.xslt) $(call quote,$<) >|$(call quote,$@)
+
+# Use the extractor transform to extract the archive source file out into its components.
+#
+# This target sleeps for 1 second to ensure the resulting index will always be newer than this make·file.
+#
+# If the archive is empty, the index will not be written by `xsltproc´ and will need to be manually created.
+$(BUILDDIR)/index : $(BUILDDIR)/extractor.xslt $(SRC)
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Extracting components for </$(NAME)>…) >&2)
+ $(silent)$(SLEEP) 1
+ $(silent)$(XSLTPROC) --nonet --novalid -o $(call quote,$@) --writesubtree $(call quote,$(dir $@)) $(call quote,$<) $(call quote,$(SRC))
+ $(silent)if $(TEST) ! -e $(call quote,$@); then $(TOUCH) $(call quote,$@); fi
+
+# All archive components are extracted alongside the index.
+$(foreach file,$(archivefiles),$(BUILDDIR)/extracted/$(file)) : $(BUILDDIR)/index ;
+
+# Process each extractor component into its final form.
+$(foreach file,$(archivefiles),$(BUILDDIR)/files/$(file)) : $(BUILDDIR)/files/% : $(BUILDDIR)/extracted/%
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Building </$(NAME)/$*>…) >&2)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(RM) -f -R $(call quote,$@)
+ $(silent)$(call processresultto,$<,$@,$*)
+
+# Archive all components in the file to the destination.
+#
+# This is a match‐anything target, with the assumption that this make·file is being called recursively from the default mode.
+$(DESTDIR)/% : $(SRC) $(foreach file,$(archivefiles),$(BUILDDIR)/files/$(file))
+ $(call inform,$(PRINTF) '%s\n' $(call quote,Archiving </$(NAME)>…) >&2)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(RM) -f -R $(call quote,$@)
+ $(silent)$(call ensuredirectory,$(BUILDDIR)/files)
+ $(silent)$(CD) $(call quote,$(BUILDDIR)/files); if $(call xpath,/*/@*[local-name()="expanded" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$(abspath $<)); then $(MKDIR) -p $(call quote,$(abspath $@)); $(PRINTF) '$(if $(archivefiles),%s\n,)' $(foreach file,$(archivefiles),$(call quote,$(file))) | $(PAX) -r -w $(call quote,$(abspath $@)); else $(PRINTF) '$(if $(archivefiles),%s\n,)' $(foreach file,$(archivefiles),$(call quote,$(file))) | $(PAX) -w -x ustar >|$(call quote,$(abspath $@)); fi
+
+# ━ § BEGIN TWO‐STEP MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+else ifeq ($(MODE),urn:fdc:ladys.computer:20231231:Shu1She4:mode:_2stage)
+
+# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
+
+override makefile := $(abspath $(THISDIR)/GNUmakefile)
+
+# (overridable) Options to use when calling ⛩📰 书社 the first time.
+shushedataopts := INCLUDEDIR=$(call quote,$(DATADIR)) BUILDDIR=$(call quote,$(BUILDDIR)/data) FINDRULES=$(subst $$,$$$$,$(call quote,$(FINDRULES) -a '(' $(FINDDATARULES) ')')) FINDINCLUDERULES=$(subst $$,$$$$,$(call quote,$(FINDINCLUDERULES))) MODE='urn:fdc:ladys.computer:20231231:Shu1She4:mode:default'
+
+# (overridable) Options to use when calling ⛩📰 书社 the second time.
+shushesiteopts := INCLUDEDIR=$(call quote,$(INCLUDEDIR) $(BUILDDIR)/data/public) BUILDDIR=$(call quote,$(BUILDDIR)/site) FINDRULES=$(subst $$,$$$$,$(call quote,$(FINDRULES) -a '!' '(' $(FINDDATARULES) ')')) FINDINCLUDERULES=$(subst $$,$$$$,$(call quote,$(FINDINCLUDERULES))) MODE='urn:fdc:ladys.computer:20231231:Shu1She4:mode:default'
+
+# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
+
+# ─ ¶ Phony Targets ───────────────────────────────────────────────────
+
+# Compile all files, or error if any are recursive.
+all : data
+ @$(MAKE) -f $(call quote,$(makefile)) $(shushesiteopts)
+
+# Destroy buildfiles.
+clean :
+ $(if $(BUILDDIR),$(silent)$(RM) -f -R $(call quote,$(BUILDDIR)/),)
+
+# Build the data and remove outdated data files.
+data : $(BUILDDIR)/data.out
+ $(silent)$(FIND) $(call quote,$(BUILDDIR)/data/public) '!' -exec $(GREP) -F -q -x '{}' $(call quote,$<) ';' -a '(' -type d -o -print ')' | $(xargsmultiquote) | $(XARGS) -E '' $(RM)
+
+# Destroy build directory and installed files.
+gone : clean uninstall ;
+
+# Install the compiled files into `DESTDIR´.
+install : all
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushedataopts)
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushesiteopts)
+
+# List all source files and includes and their computed types.
+list : data
+ @$(PRINTF) '%b' $(call quote,\0033[1;7m||Stage|1:||\0033[22;27m\0033[4m||||||||||||||||||||\0033[24m ) | $(TR) ' |' '\n '
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushedataopts)
+ @$(PRINTF) '%b' $(call quote, \0033[1;7m||Stage|2:||\0033[22;27m\0033[4m||||||||||||||||||||\0033[24m ) | $(TR) ' |' '\n '
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushesiteopts)
+listout : data
+ @{ $(MAKE) -f $(call quote,$(makefile)) $@ $(shushedataopts); $(MAKE) -f $(call quote,$(makefile)) $@ $(shushesiteopts); } | $(SED) '$$!s/$$/ /' | $(TR) -d '\n'
+list1 listout1 : %1 :
+ @$(MAKE) -f $(call quote,$(makefile)) $* $(shushedataopts)
+list2 listout2 : %2 : data
+ @$(MAKE) -f $(call quote,$(makefile)) $* $(shushesiteopts)
+
+# Destroy installed files.
+uninstall :
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushesiteopts)
+
+# Add as a prerequisite to treat the target as tho it were phony.
+FORCE : ;
+
+# ─ ¶ Special Targets ─────────────────────────────────────────────────
+
+# Don’t use any implicit rules.
+.SUFFIXES : ;
+
+# Phony rules; always consider these out·of·date.
+.PHONY : FORCE all data clean gone install list listout uninstall ;
+
+# ─ ¶ Build Targets ───────────────────────────────────────────────────
+
+$(BUILDDIR)/data.out : FORCE
+ @$(MAKE) -f $(call quote,$(makefile)) $(shushedataopts)
+ @$(MAKE) -s -f $(call quote,$(makefile)) listout QUIET=1 $(shushedataopts) | $(TR) ' ' '\n' | $(xargsmultiquote) | $(XARGS) -E '' $(PRINTF) $(call quote,$(BUILDDIR)/data/public/%s\n) >$(call quote,$(BUILDDIR)/data.out)
+
+$(BUILDDIR)/data/% : FORCE
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushedataopts)
+
+$(BUILDDIR)/site/% : data
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(shushesiteopts)
+
+$(DESTDIR)/% : data
+ @$(MAKE) -f $(call quote,$(makefile)) $@ $(if $(shell $(GREP) -F -x $(call quote,$(BUILDDIR)/data/$*) $(BUILDDIR)/data.out),$(shushedataopts),$(shushesiteopts))
+
+# ━ § END DEFINED MAKE·FILE MODES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+else
+$(error Unrecognized MODE: $(MODE))
+endif
Lady’s Gitweb / Shushe / blobdiff