║│ │║
║│ • cat │║
║│ • cp │║
+║│ • date │║
║│ • echo │║
║│ • file │║
║│ • find │║
║│ • rm │║
║│ • sed │║
║│ • sleep │║
+║│ • stat │║
║│ • test │║
║│ • touch │║
║│ • tr (requires support for `-d´) │║
# different implementation, you can override the appropriate variable.
CAT := cat
CP := cp
+DATE := date
ECHO := echo
FILE := file
FIND := find
RM := rm
SED := sed
SLEEP := sleep
+STAT := stat
TEST := test
TOUCH := touch
TR := tr
XSLTPROC := xsltproc
# The directory which contains the source files.
+#
+# Multiple directories can be given so long as files with the same name
+# do not exist in each.
SRCDIR := sources
# The directory which contains “includes”: Files which may be included
# in other files but for which no final output will be generated.
#
-# This can be inside of `SOURCES_DIRECTORY´ if desired.
+# Multiple directories can be given so long as files with the same name
+# do not exist in each.
+#
+# These can be inside of `SRCDIR´ directories if desired.
INCLUDEDIR := sources/includes
# The directory in which to generate temporary buildfiles.
# Configuration of `find´.
#
-# By default, `find´ will follow symlinks and use extended regular
-# expressions, ignoring hidden files and those which begin with a
-# period.
-FINDOPTS := -LE
+# By default, `find´ will not follow symlinks and will use extended
+# regular expressions, ignoring hidden files and those which begin with
+# a period.
+FINDOPTS := -PE
FINDRULES := -flags -nohidden -and -not -name '.*'
+FINDINCLUDEOPTS := $(FINDOPTS)
+FINDINCLUDERULES := $(FINDRULES)
# The list of parsers for plaintext file types.
#
# (callable) Escape special characters for use in sed regular
# expressions.
-override sedesc = $(subst $$,\$$,$(subst *,\*,$(subst .,\.,$(subst [,\[,$(subst ^,\^,$(subst \,\\,$1))))))
+override sedesc = $(subst /,[/],$(subst $$,\$$,$(subst *,\*,$(subst .,\.,$(subst [,\[,$(subst ^,\^,$(subst \,\\,$1)))))))
-# Collect all of the applicable includes from the includes directory.
+# (overridable) Collect all of the applicable includes from the
+# includes directory.
sourceincludes := $(shell $(FIND) $(FINDOPTS) $(INCLUDEDIR) -type f '(' $(FINDRULES) ')')
-# Collect all of the applicable source files from the source directory,
-# removing any which are also includes.
+# (overridable) Collect all of the applicable source files from the
+# source directory, removing any which are also includes.
sourcefiles := $(filter-out $(sourceincludes),$(shell $(FIND) $(FINDOPTS) $(SRCDIR) -type f '(' $(FINDRULES) ')'))
# Figure out the file type of each source file and source include.
# Get the list of supported plaintext file types from the parser.
ifneq ($(wildcard $(BUILDDIR)/parser.xslt),)
-override plaintexttypes := $(shell $(XSLTPROC) $(call quote,$(THISDIR)/lib/parser2types.xslt) $(call quote,$(BUILDDIR)/parser.xslt))
+override plaintexttypes := $(filter-out $(XMLTYPES),$(shell $(XSLTPROC) $(call quote,$(THISDIR)/lib/parser2types.xslt) $(call quote,$(BUILDDIR)/parser.xslt)))
endif
-# Simplify the file type by only taking the first component (image,
-# text, ⁊·c).
-override simpletypes := $(shell $(TR) ' ' '\n' <<< $(call quote,$(types)) | $(SED) 's`/[^/]*$$``g')
-
# (callable) Get all of the files (source and includes) which have the
# given types.
override filesoftype = $(foreach type,$1,$(patsubst %?type=$(type),%,$(filter %?type=$(type),$(types))))
# Build up collections of various file types.
-override plaintextfiles := $(call filesoftype,$(plaintexttypes))
-override xmlfiles := $(filter-out $(plaintextfiles),$(call filesoftype,$(XMLTYPES)))
+override xmlfiles := $(call filesoftype,$(XMLTYPES))
+override plaintextfiles := $(filter-out $(xmlfiles),$(call filesoftype,$(plaintexttypes)))
override assetfiles := $(filter-out $(xmlfiles) $(plaintextfiles),$(sourcefiles) $(sourceincludes))
# (callable) Get the types of the given files.
override typeoffile = $(patsubst $(foreach file,$1,$(file)?type=%),%,$(filter $(foreach file,$1,$(file)?type=%),$(types)))
+# (callable) Get the identifier for the given transform.
+override id = $(or $(shell $(XMLLINT) --xpath '/*/*[local-name()="id" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"]/text()[1]' $1),$(basename $(notdir $1)) | $(SED))
+
+# (callable) Get the local path for the given source file.
+override sourcepath = $(firstword $(foreach directory,$(SRCDIR),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))
+
+# (callable) Get the local path for the given include.
+override includepath = $(firstword $(foreach directory,$(INCLUDEDIR),$(if $(filter $(directory)/%,$1),$(patsubst $(directory)/%,%,$1),)))
+
# (callable) Get base64 data u·r·i’s for the given files.
override datauri = $(foreach file,$1,data:$(call typeoffile,$(file));base64,$(shell $(UUENCODE) -m -r $(call quote,$(file)) _ | tr -d ' \n'))
# (callable) Get local leiris for the given files.
-override localuri = $(foreach file,$1,$(if $(filter $(file),$(sourceincludes)),$(patsubst $(INCLUDEDIR)/%,about:shushe?include=%,$(file)),$(patsubst $(SRCDIR)/%,about:shushe?source=%,$(file))))
+override localuri = $(foreach file,$1,$(if $(filter $(file),$(sourceincludes)),about:shushe?include=$(call includepath,$(file)),about:shushe?source=$(call sourcepath,$(file))))
+
+# Pair each source file and include with its local u·r·i.
+override sourcelocalpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(file)`$(call localuri,$(file)))
# (callable) Get the source files for the given local leiris.
-override sourcefile = $(foreach file,$1,$(if $(filter about:shushe?include=%,$(file)),$(patsubst about:shushe?include=%,$(INCLUDEDIR)/%,$(file)),$(patsubst about:shushe?source=%,$(SRCDIR)/%,$(file))))
+override sourcefile = $(foreach local,$1,$(patsubst %`$(local),%,$(filter %`$(local),$(sourcelocalpair))))
# Adds a requirement on `$(BUILDDIR)/.update-types´ if the file is
# present.
# This file is created after a reload due to type changes, and is
# removed after. Requiring it ensures that file classifications are
# up‐to‐date immediately after the reload.
-override typeupdates := $(if $(wildcard $(BUILDDIR)/.update-types),$(BUILDDIR)/.update-types,)
+override typeupdates := $(wildcard $(BUILDDIR)/.update-types)
# (callable) Get the location of the transformed X·M·L files for the
# given source files.
-override parsed = $(foreach file,$1,$(if $(filter $(file),$(sourceincludes)),$(patsubst $(INCLUDEDIR)/%,$(BUILDDIR)/includes/%,$(file)),$(patsubst $(SRCDIR)/%,$(BUILDDIR)/sources/%,$(file))))
+override parsed = $(foreach file,$1,$(if $(filter $(file),$(sourceincludes)),$(BUILDDIR)/includes/$(call includepath,$(file)),$(BUILDDIR)/sources/$(call sourcepath,$(file))))
+
+# Pair each source file and include with its parsed location.
+override sourceparsedpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(file)`$(call parsed,$(file)))
+
+# (callable) Get the source files for the given parsed file.
+override unparsed = $(foreach file,$1,$(patsubst %`$(file),%,$(filter %`$(file),$(sourceparsedpair))))
ifneq ($(wildcard $(BUILDDIR)/dependencies),)
# Pair each file with a list of dependencies for it.
override compilablefiles := $(filter-out $(assetfiles) $(recursivefiles),$(sourcefiles))
# (callable) Get the compiled locations for the given source files.
-override compiled = $(patsubst $(SRCDIR)/%,$(BUILDDIR)/public/%,$(1))
+override compiled = $(foreach file,$1,$(BUILDDIR)/public/$(call sourcepath,$(file)))
+
+# Pair each source file and include with its compiled location.
+override sourcecompiledpair = $(foreach file,$(sourcefiles) $(sourceincludes),$(file)`$(call compiled,$(file)))
+
+# (callable) Get the source files for the given compiled file.
+override uncompiled = $(foreach file,$1,$(patsubst %`$(file),%,$(filter %`$(file),$(sourcecompiledpair))))
# (callable) Get the installed locations for the given source files.
-override installed = $(patsubst $(SRCDIR)/%,$(DESTDIR)/%,$(1))
+override installed = $(foreach file,$1,$(DESTDIR)/$(call sourcepath,$(file)))
# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
$(silent)$(PRINTF) '%b' '$(subst $(newline),\n,$(makefileinfo))'
# Compile all files, or error if any are recursive.
-all: $(call compiled,$(recursivefiles) $(compilablefiles) $(assetfiles)) ;
+all: $(call compiled,$(recursivefiles) $(compilablefiles) $(filter $(sourcefiles),$(assetfiles))) ;
# Destroy buildfiles.
clean:
$(silent)$(RM) -rf $(BUILDDIR)/ $(call compiled,$(recursivefiles) $(compilablefiles))
# Install the compiled files into `DESTDIR´.
-install: $(call installed,$(recursivefiles) $(compilablefiles) $(assetfiles)) ;
+install: $(call installed,$(recursivefiles) $(compilablefiles) $(filter $(sourcefiles),$(assetfiles))) ;
# List all source files and includes and their computed types.
list:
# Phony rules; always consider these out‐of‐date.
.PHONY: all default clean gone info install list $(call compiled,$(recursivefiles));
+ifneq ($(wildcard $(BUILDDIR)/.update-types)$(wildcard $(BUILDDIR)/dependencies),)
+# Reload this make·file if the dependency graph has changed.
+#
+# This graph is a dependency for some of the variables that this
+# make·file uses, so it’s important to ensure that they are actually
+# up‐to‐date prior to executing any later rules.
+#
+# This recipe only exists after types have been updated or when the
+# dependency graph already exists.
+$(THISDIR)/GNUmakefile:: $(BUILDDIR)/dependencies
+ $(silent)$(TOUCH) $(THISDIR)/GNUmakefile
+ $(silent)$(RM) -f $(BUILDDIR)/.update-types
+ @$(PRINTF) '%b\n' '\0033[1mDependency graph updated. Restarting…\0033[22m'
+endif
+
ifeq ($(wildcard $(BUILDDIR)/.update-types),)
# Reload this make·file if any of the magic files or parsers have
# changed.
# the restart have a more current time·stamp.
$(THISDIR)/GNUmakefile:: $(BUILDDIR)/magic.mgc $(BUILDDIR)/parser.xslt $(THISDIR)/lib/parser2types.xslt
$(silent)$(TOUCH) $(THISDIR)/GNUmakefile
- $(silent)$(TOUCH) $(call quote,$(BUILDDIR)/.update-types)
$(silent)$(RM) -f $(call quote,$(BUILDDIR)/dependencies)
@$(PRINTF) '%b\n' '\0033[1mMagic file or parsers have updated. Restarting…\0033[22m'
$(silent)$(SLEEP) 1
-endif
-
-ifneq ($(wildcard $(BUILDDIR)/.update-types)$(wildcard $(BUILDDIR)/dependencies),)
-# Reload this make·file if the dependency graph has changed.
-#
-# This graph is a dependency for some of the variables that this
-# make·file uses, so it’s important to ensure that they are actually
-# up‐to‐date prior to executing any later rules.
-#
-# This recipe only exists after types have been updated or when the
-# dependency graph already exists.
-$(THISDIR)/GNUmakefile:: $(BUILDDIR)/dependencies
- $(silent)$(TOUCH) $(THISDIR)/GNUmakefile
- $(silent)$(RM) -f $(BUILDDIR)/.update-types
- @$(PRINTF) '%b\n' '\0033[1mDependency graph updated. Restarting…\0033[22m'
+ $(silent)$(TOUCH) $(call quote,$(BUILDDIR)/.update-types)
endif
# ─ ¶ Build Targets ───────────────────────────────────────────────────
$(BUILDDIR)/magic.mgc: $(wildcard $(MAGICDIR)/*)
@$(ECHO) "Compiling new magic…"
$(silent)$(call ensuredirectory,$(dir $@))
- $(silent)$(FILE) -C -m $(call quote,$(MAGICDIR))
- $(silent)$(MV) $(call quote,$(MAGICDIR).mgc) $(call quote,$(BUILDDIR)/magic.mgc)
+ $(silent)cd $(call quote,$(BUILDDIR)) && $(FILE) -C -m $(call quote,$(realpath $(MAGICDIR)))
# Generate the main parser.
$(BUILDDIR)/parser.catalog: $(PARSERS)
@$(ECHO) "Generating catalog of parsers…"
$(silent)$(XMLCATALOG) --create --noout $(call quote,$@)
- $(foreach parser,$(PARSERS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(basename $(notdir $(parser)))) $(call quote,../$(parser)) --noout $(call quote,$@)$(newline))
+ $(foreach parser,$(PARSERS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(call id,$(parser))) $(call quote,../$(parser)) --noout $(call quote,$@)$(newline))
$(BUILDDIR)/parser.xslt: $(BUILDDIR)/parser.catalog $(THISDIR)/lib/catalog2parser.xslt
@$(ECHO) "Generating main parser…"
$(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/catalog2parser.xslt) $(call quote,$<)
-# Note updates to parsers or magic.
-#
-# This file is actually generated as part of the make·file restart
-# process, so it doesn’t need any recipes.
-$(BUILDDIR)/.update-types: $(BUILDDIR)/magic.mgc $(BUILDDIR)/parser.xslt $(THISDIR)/lib/parser2types.xslt ;
-
# Parse the files.
#
# Even plain X·M·L files are parsed, because they may contain X·H·T·M·L
# `<script>´ elements which contain other kinds of data. Asset files
# are turned into H·T·M·L embeds pointing to `data:´ U·R·I’s.
-$(call parsed,$(sourceincludes)): $(BUILDDIR)/includes/%: $(INCLUDEDIR)/% $(typeupdates)
- @$(PRINTF) '%s\n' $(call quote,Processing `$<´…)
- $(silent)$(call ensuredirectory,$(dir $@))
- $(silent)$(if $(filter $<,$(assetfiles)),$(PRINTF) '%s\n' $(call quote,<object xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$(INCLUDEDIR)/$*)" data="$(call datauri,$<)"/>) > $(call quote,$@),$(if $(filter $<,$(plaintextfiles)),$(call wrapplaintext,$<),$(CAT) $(call quote,$<)) | $(XSLTPROC) -o $(call quote,$@) $(call quote,$(BUILDDIR)/parser.xslt) -)
-$(call parsed,$(sourcefiles)): $(BUILDDIR)/sources/%: $(SRCDIR)/% $(typeupdates)
+$(call parsed,$(sourcefiles) $(sourceincludes)): %: $$(call unparsed,$$@) $(typeupdates)
@$(PRINTF) '%s\n' $(call quote,Processing `$<´…)
$(silent)$(call ensuredirectory,$(dir $@))
- $(silent)$(if $(filter $<,$(assetfiles)),$(PRINTF) '%s\n' $(call quote,<object xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$(SRCDIR)/$*)" data="$(call datauri,$<)"/>) > $(call quote,$@),$(if $(filter $<,$(plaintextfiles)),$(call wrapplaintext,$<),$(CAT) $(call quote,$<)) | $(XSLTPROC) -o $(call quote,$@) $(call quote,$(BUILDDIR)/parser.xslt) -)
+ $(silent)$(if $(filter $<,$(assetfiles)),$(PRINTF) '%s\n' $(call quote,<object xmlns="http://www.w3.org/1999/xhtml" type="$(call typeoffile,$<)" data="$(call datauri,$<)"/>) > $(call quote,$@),$(if $(filter $<,$(plaintextfiles)),$(call wrapplaintext,$<),$(CAT) $(call quote,$<)) | $(XSLTPROC) -o $(call quote,$@) $(call quote,$(BUILDDIR)/parser.xslt) -)
# Generate a catalog of all transformed files, for use when processing
# includes. This does not depend on actually transforming the files.
$(BUILDDIR)/transform.catalog: $(TRANSFORMS)
@$(ECHO) "Generating catalog of transforms…"
$(silent)$(XMLCATALOG) --create --noout $(call quote,$@)
- $(foreach transform,$(TRANSFORMS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(basename $(notdir $(transform)))) $(call quote,../$(transform)) --noout $(call quote,$@)$(newline))
+ $(foreach transform,$(TRANSFORMS),$(silent)$(XMLCATALOG) --add uri $(call quote,$(call id,$(transform))) $(call quote,../$(transform)) --noout $(call quote,$@)$(newline))
$(BUILDDIR)/transform.xslt: $(BUILDDIR)/transform.catalog $(THISDIR)/lib/catalog2transform.xslt
@$(ECHO) "Generating main transform…"
$(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/catalog2transform.xslt) $(call quote,$<)
# Generate the output files using the dependencies as necessary.
-$(call compiled,$(compilablefiles)): $(BUILDDIR)/public/%: $$(call parsed,$(SRCDIR)/%) $(BUILDDIR)/transform.xslt $$(call parsed,$$(call dependencies,$(SRCDIR)/%))
+$(call compiled,$(compilablefiles)): $(BUILDDIR)/public/%: $$(call parsed,$$(call uncompiled,$$@)) $(BUILDDIR)/transform.xslt $$(call parsed,$$(call dependencies,$$(call uncompiled,$$@)))
$(silent)$(call ensuredirectory,$(dir $@))
- @$(PRINTF) '%s\n' $(call quote,Compiling `$*´…)
- $(silent)$(XSLTPROC) -o $(call quote,$@) --stringparam catalog 'catalog' $(call quote,$(BUILDDIR)/transform.xslt) $(call quote,$<)
-$(call compiled,$(filter $(assetfiles),$(sourcefiles))): $(BUILDDIR)/public/%: $(SRCDIR)/%
- @$(PRINTF) '%s\n' $(call quote,Compiling `$*´…)
+ @$(PRINTF) '%s\n' $(call quote,Compiling </$*>…)
+ $(silent)$(XSLTPROC) -o $(call quote,$@) --stringparam catalog 'catalog' --stringparam buildtime '$(shell TZ= $(DATE) '+%Y-%m-%dT%H:%M:%SZ')' --stringparam srctime '$(shell TZ= $(STAT) -f '%Sm' -t '%Y-%m-%dT%H:%M:%SZ' $(call quote,$(call uncompiled,$@)))' --stringparam path $(call quote,/$*) $(call quote,$(BUILDDIR)/transform.xslt) $(call quote,$<)
+$(call compiled,$(filter $(assetfiles),$(sourcefiles))): $(BUILDDIR)/public/%: $$(call uncompiled,$$@)
+ @$(PRINTF) '%s\n' $(call quote,Compiling </$*>…)
$(silent)$(call ensuredirectory,$(dir $@))
$(silent)$(CP) $(call quote,$<) $(call quote,$@)
# Install compiled files (or error in the case of recursive ones).
$(call installed,$(filter $(assetfiles),$(sourcefiles)) $(recursivefiles) $(compilablefiles)): $(DESTDIR)/%: $(BUILDDIR)/public/%
- @$(PRINTF) '%s\n' $(call quote,Installing `$*´…)
+ @$(PRINTF) '%s\n' $(call quote,Installing </$*>…)
$(silent)$(call ensuredirectory,$(dir $@))
$(silent)$(CP) $(call quote,$<) $(call quote,$@)
Lady’s Gitweb / Shushe / blobdiff