║│ • mkdir (requires support for `-p´) │║
║│ • mv │║
║│ • od (requires support for `-t x1´) │║
+║│ • pax (only when generating archives) │║
║│ • printf │║
║│ • rm │║
║│ • sed │║
MKDIR := mkdir
MV := mv
OD := od
+PAX := pax
PRINTF := printf
RM := rm
SED := sed
XMLLINT := xmllint
XSLTPROC := xsltproc
+# This variable is not used in normal execution.
+#
+# In the archiving `MODE´, it provides the X·M·L file from which the archive should be constructed.
+SRC :=
+
+# This variable is not used in normal execution.
+#
+# In the archiving `MODE´, it provides a user‐friendly name for the archive.
+NAME :=
+
# The directory which contains the source files.
#
# Multiple directories can be given so long as files with the same name do not exist in each.
INCLUDEDIR := sources/includes
# The directory in which to generate temporary buildfiles.
+#
+# This variable is also used by the archiving `MODE´.
BUILDDIR := build
# The directory into which to output files on `make install´.
+#
+# This variable is also used by the archiving `MODE´.
DESTDIR := public
# The location of this Makefile (and related ⛩️📰 书社 files), relative to the current working directory.
#
# By default, this is inferred from the variable `MAKEFILE_LIST´.
+#
+# This variable is also used by the archiving `MODE´.
THISDIR := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST))))
# Configuration of `find´.
endif
endif
+# The mode in which to run this make·file.
+# Modes essentially allow for the combination of multiple conceptual make·files into a single source.
+#
+# The following modes are available :—
+#
+# • ‹ urn:fdc:ladys.computer:20231231:Shu1She4:mode:default ›:
+# The default mode; typical Shushe behaviours.
+#
+# • ‹ urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive ›:
+# Generates archive files from parse results.
+MODE := urn:fdc:ladys.computer:20231231:Shu1She4:mode:default
+
# Set to a non·empty value to print all commands as they run.
VERBOSE :=
# The default target for this makefile.
.DEFAULT_GOAL := all
-# ━ § BEGIN MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# ━ § BEGIN SHARED MAKE·FILE CONSTRUCTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
# Outputs an `@´ to silence rules, unless `VERBOSE´ is nonempty.
override silent := $(if $(VERBOSE),,@)
+# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
+
+# (callable) Check to see if the given directory exists and create it if not.
+override ensuredirectory = if $(TEST) ! -d $(call quote,$1); then $(MKDIR) -p $(call quote,$1); fi
+
+# (callable) Test if the provided xpath expression matches the provided document.
+override xpath = $(XMLLINT) --xpath $(call quote,$1) $(call quote,$2) > /dev/null 2> /dev/null
+
+# (callable) Extract the value of the text nodes in the provided X·M·L document and print them to `stdout´.
+override extracttext = $(PRINTF) '%s' '<transform xmlns="http://www.w3.org/1999/XSL/Transform" version="1.0"><output method="text" encoding="UTF-8"/></transform>' | $(XSLTPROC) - $(call quote,$1)
+
+# (callable) Process the provided transformation result and output the result to the provided location, given the provided relative path.
+override processresultto = if $(call xpath,/*[local-name()="raw-text" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then $(RM) -f $(call quote,$2); $(call extracttext,$1) > $(call quote,$2); elif $(call xpath,/*[local-name()="base64-binary" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then $(RM) -f $(call quote,$2); $(call extracttext,$1) | $(TR) -d '\t\n\f\r ' | $(UUDECODE) -m -r > $(call quote,$2); elif $(call xpath,/*[local-name()="archive" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$1); then $(RM) -f $(call quote,$2); $(MAKE) -f $(call quote,$(abspath $(THISDIR)/GNUmakefile)) $(call quote,$2) NAME=$(call quote,$3) SRC=$(call quote,$1) BUILDDIR=$(call quote,$(BUILDDIR)/archive/$3) DESTDIR=$(call quote,$(patsubst %/,%,$(dir $2))) MODE='urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive'; else $(RM) -f $(call quote,$2); $(XMLLINT) --nsclean $(call quote,$1) > $(call quote,$2); fi
+
+# ━ § BEGIN DEFAULT MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+ifeq ($(MODE),urn:fdc:ladys.computer:20231231:Shu1She4:mode:default)
+
+# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
+
# (callable) Test to see if the prerequisites provided by the second argument matches the value in the file corresponding to the first argument in `$(BUILDDIR)/lastprereqs´.
# If not, save the new value and then add FORCE.
# Return them regardless.
# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
-# (callable) Check to see if the given directory exists and create it if not.
-override ensuredirectory = if $(TEST) ! -d $(call quote,$1); then $(MKDIR) -p $(call quote,$1); fi
-
# (callable) Get the identifier for the given parser or transform.
override id = $(XMLLINT) --xpath '/*/*[local-name()="id" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"]/text()[1]' $(call quote,$1) 2> /dev/null || $(PRINTF) '%s\n' $(call quote,about:shushe?$(or $2,unknown)=$(call pathenc,$(basename $(notdir $1))))
# This isn’t a perfect substitution (it makes some assumptions about the format of the underlying X·M·L), but it should be workable for most sensible, welformed files.
override serializexml = $(SED) "$$($(PRINTF) '%b' '/<?xml[ \t]\\{1,\\}version=[\0042\0047]1.1/,$${ s/<?xml[^>]*?>/<!--<?xml version=\00421.1\0042?>-->/\n s/&\0043x0*[1-8BCEFbcef];/\0302\0221/g\n s/&\0043x0*1[0-9A-Fa-f];/\0302\0221/g\n s/&\00430*[1-8];/\0302\0221/g\n s/&\00430*1[124-9];/\0302\0221/g\n s/&\00430*2[0-9];/\0302\0221/g\n s/&\00430*3[01];/\0302\0221/g\n}')" < $(call quote,$1) | $(SED) "$$(PRINTF '%b' ':a\n/^\\n*$$/{ $$d\n N\n ba\n}')"
-# (callable) Test if the provided xpath expression matches the provided document.
-override xpath = $(XMLLINT) --xpath $(call quote,$1) $(call quote,$2) > /dev/null 2> /dev/null
-
-# (callable) Extract the value of the text nodes in the provided X·M·L document and print them to `stdout´.
-override extracttext = $(PRINTF) '%s' '<transform xmlns="http://www.w3.org/1999/XSL/Transform" version="1.0"><output method="text" encoding="UTF-8"/></transform>' | $(XSLTPROC) - $(call quote,$1)
-
# ─ ¶ Phony Targets ───────────────────────────────────────────────────
# Compile all files, or error if any are recursive.
$(call built,$(compilablefiles)) : $(BUILDDIR)/public/% : $(BUILDDIR)/results/%
@$(PRINTF) '%s\n' $(call quote,Building </$*>…)
$(silent)$(call ensuredirectory,$(dir $@))
- $(silent)if $(call xpath,/*[local-name()="raw-text" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$<); then $(RM) -f $(call quote,$@); $(call extracttext,$<) > $(call quote,$@); elif $(call xpath,/*[local-name()="base64-binary" and namespace-uri()="urn:fdc:ladys.computer:20231231:Shu1She4"],$<); then $(RM) -f $(call quote,$@); $(call extracttext,$<) | $(TR) -d '\t\n\f\r ' | $(UUDECODE) -m -r > $(call quote,$@); else $(LN) -s -f $(call quote,$(subst $(space),,$(foreach component,$(subst /, ,$*),../))results/$*) $(call quote,$@); fi
+ $(silent)$(call processresultto,$<,$@,$*)
$(call built,$(filter $(assetfiles),$(sourcefiles))) : $(BUILDDIR)/public/% : $$(call unbuilt,$$@)
@$(PRINTF) '%s\n' $(call quote,Building </$*>…)
$(silent)$(call ensuredirectory,$(dir $@))
@$(PRINTF) '%s\n' $(call quote,Installing </$*>…)
$(silent)$(call ensuredirectory,$(dir $@))
$(silent)$(CP) $(call quote,$<) $(call quote,$@)
+
+# ━ § BEGIN ARCHIVE MAKE·FILE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+else ifeq ($(MODE),urn:fdc:ladys.computer:20231231:Shu1She4:mode:archive)
+
+# ─ ¶ Non‐Recipe Variable Definitions ─────────────────────────────────
+
+# Get the list of files in the archive.
+ifneq ($(wildcard $(BUILDDIR)/index),)
+override archivefiles := $(patsubst ./extracted/%,%,$(shell $(CAT) $(call quote,$(BUILDDIR)/index)))
+endif
+
+# ─ ¶ Recipe Variable Definitions ─────────────────────────────────────
+
+# ─ ¶ Phony Targets ───────────────────────────────────────────────────
+
+# ─ ¶ Special Targets ─────────────────────────────────────────────────
+
+# Reload this make·file if the archive components have changed.
+$(THISDIR)/GNUmakefile : $(BUILDDIR)/index
+ $(silent)$(TOUCH) $(THISDIR)/GNUmakefile
+ @$(PRINTF) '%b\n' $(call quote,\0033[1mArchive components for </$(NAME)> updated. Restarting…\0033[22m)
+
+# ─ ¶ Build Targets ───────────────────────────────────────────────────
+
+# Build the extractor transform for extracting the contents of the archive source file.
+$(BUILDDIR)/extractor.xslt : $(SRC) $(THISDIR)/lib/archive2extractor.xslt
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(XSLTPROC) -o $(call quote,$@) $(call quote,$(THISDIR)/lib/archive2extractor.xslt) $(call quote,$<)
+
+# Use the extractor transform to extract the archive source file out into its components.
+#
+# This target sleeps for 1 second to ensure the resulting index will always be newer than this make·file.
+$(BUILDDIR)/index : $(BUILDDIR)/extractor.xslt $(SRC)
+ @$(PRINTF) '%s\n' $(call quote,Extracting components for </$(NAME)>…)
+ $(silent)$(SLEEP) 1
+ $(silent)$(XSLTPROC) -o $(call quote,$@) --writesubtree $(call quote,$(dir $@)) $(call quote,$<) $(call quote,$(SRC))
+
+# All archive components are extracted alongside the index.
+$(foreach file,$(archivefiles),$(BUILDDIR)/extracted/$(file)) : $(BUILDDIR)/index ;
+
+# Process each extractor component into its final form.
+$(foreach file,$(archivefiles),$(BUILDDIR)/files/$(file)) : $(BUILDDIR)/files/% : $(BUILDDIR)/extracted/%
+ @$(PRINTF) '%s\n' $(call quote,Building </$(NAME)/$*>…)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)$(call processresultto,$<,$@,$*)
+
+# Archive all components in the file to the destination.
+#
+# This is a match‐anything target, with the assumption that this make·file is being called recursively from the default mode.
+$(DESTDIR)/% : $(foreach file,$(archivefiles),$(BUILDDIR)/files/$(file))
+ @$(PRINTF) '%s\n' $(call quote,Archiving </$(NAME)>…)
+ $(silent)$(call ensuredirectory,$(dir $@))
+ $(silent)cd $(call quote,$(BUILDDIR)/files); $(PRINTF) '%s\n' $(foreach file,$(archivefiles),$(call quote,$(file))) | $(PAX) -w > $(call quote,$(abspath $@))
+
+# ━ § END DEFINED MAKE·FILE MODES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+else
+$(error Unrecognized MODE: $(MODE))
+endif
<xslt:choose>
<xslt:when test="@namespace-uri='&xml;'"/>
<xslt:when test="$context[self::html:* or self::svg:*] and @namespace-uri='' and @local-name='lang'"/>
+ <xslt:when test="@namespace-uri='&书社;' and @local-name='archived-as' and not($context-nodes/ancestor::*[not(self::书社:apply-attributes-to-root or self::书社:apply-attributes)][1][self::书社:archive])"/>
<xslt:when test="@namespace-uri='&书社;' and (@local-name='destination' or @local-name='disable-output-wrapping' or @local-name='version')"/>
<xslt:when test="preceding-sibling::*[@local-name=current()/@local-name and @namespace-uri=current()/@namespace-uri]"/>
<xslt:otherwise>
</xslt:variable>
<html:html>
<xslt:copy-of select="$nodes[self::html:html]/@*"/>
+ <xslt:if test="not($nodes[self::html:html]/@书社:archived-as) and $nodes/@书社:archived-as">
+ <xslt:attribute name="书社:archived-as">
+ <xslt:value-of select="$nodes/@书社:archived-as"/>
+ </xslt:attribute>
+ </xslt:if>
<xslt:if test="not($nodes[self::html:html]/@lang) and $nodes[self::html:*]/@lang|$nodes[self::svg:*]/@lang|$nodes/@xml:lang">
<xslt:attribute name="lang">
<xslt:value-of select="$nodes[self::html:*]/@lang|$nodes[self::svg:*]/@lang|$nodes/@xml:lang"/>
<xslt:variable name="result-nodes" select="exsl:node-set($书社:result)/node()[not(self::书社:apply-attributes-to-root)]|exsl:node-set($书社:result)/书社:apply-attributes-to-root/descendant::node()[not(self::书社:apply-attributes-to-root) and not(ancestor::*[not(self::书社:apply-attributes-to-root)])]"/>
<xslt:variable name="root-with-attributes">
<xslt:choose>
- <xslt:when test="$result-nodes/self::书社:*[local-name()='raw-text' or local-name()='base64-binary']|$result-nodes/@书社:disable-output-wrapping|exsl:node-set($书社:result)//书社:apply-attributes-to-root/@书社:disable-output-wrapping">
+ <xslt:when test="$result-nodes/self::书社:*[local-name()='raw-text' or local-name()='base64-binary' or local-name()='archive']|$result-nodes/@书社:disable-output-wrapping|exsl:node-set($书社:result)//书社:apply-attributes-to-root/@书社:disable-output-wrapping">
<xslt:call-template name="书社:apply-attributes">
<xslt:with-param name="and-version" select="true()"/>
<xslt:with-param name="context-nodes" select="exsl:node-set($书社:result)//书社:apply-attributes-to-root"/>
<xslt:apply-templates select="@*|node()" mode="书社:application"/>
</xslt:copy>
</xslt:template>
- <xslt:template match="@书社:destination|@书社:disable-output-wrapping" mode="书社:application" priority="1"/>
+ <xslt:template match="@书社:destination|@书社:disable-output-wrapping|@书社:archived-as[../ancestor::*[not(self::书社:apply-attributes-to-root or self::书社:apply-attributes)]]" mode="书社:application" priority="1"/>
+ <xslt:template match="书社:archive" mode="书社:application">
+ <xslt:copy>
+ <xslt:for-each select="@*|node()">
+ <xslt:choose>
+ <xslt:when test="self::*">
+ <xslt:variable name="component">
+ <xslt:choose>
+ <xslt:when test="self::书社:*[local-name()='raw-text' or local-name()='base64-binary' or local-name()='archive']|@书社:disable-output-wrapping">
+ <xslt:copy-of select="."/>
+ </xslt:when>
+ <xslt:otherwise>
+ <xslt:call-template name="书社:wrap">
+ <xslt:with-param name="nodes" select="."/>
+ </xslt:call-template>
+ </xslt:otherwise>
+ </xslt:choose>
+ </xslt:variable>
+ <xslt:apply-templates select="exsl:node-set($component)/node()" mode="书社:application"/>
+ </xslt:when>
+ <xslt:when test="../ancestor::*[not(self::书社:apply-attributes-to-root or self::书社:apply-attributes)] and local-name()='archived-as' and namespace-uri()='&书社;'"/>
+ <xslt:otherwise>
+ <xslt:apply-templates select="." mode="书社:application"/>
+ </xslt:otherwise>
+ </xslt:choose>
+ </xslt:for-each>
+ </xslt:copy>
+ </xslt:template>
<xslt:template match="书社:apply-attributes" mode="书社:application" priority="1">
<xslt:variable name="children">
<xslt:apply-templates select="node()" mode="书社:application"/>